Wago 24 V dc Safety Relay With 2 Safety Contacts 2 Auxilary Contacts Compatible With Safety Relay

  • RS-stocknr. 180-3066
  • Fabrikantnummer 788-906
  • Fabrikant Wago
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Relay module, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Green status indicator, Module width: 15 mm

Reinforced insulation between coil and contacts
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Auxiliary Contacts 2
Function Safety Relay
Safety Contacts 2
Terminal Type Cage Clamp
Length 15mm
Width 86mm
Depth 64mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
42,02
(excl. BTW)
50,84
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 42,02
Related Products
Detects the stop condition of all types of ...
Description:
Detects the stop condition of all types of AC or DC motor driven machines which, when the motor runs down, produce a residual voltage in the windings. No additional sensor is required1 N/O and 1 N/C contacts, EN954-1 Category 3 ...
The PNOZ X7 range of Safety Relays by ...
Description:
The PNOZ X7 range of Safety Relays by PILZ introduces your circuit to a safety related interruption wherein the primary applications are typically in potential hazardous environments where you need that quick power cut off. Particularly useful in automated environments ...
The PNOZ X3 range of Safety Relays by ...
Description:
The PNOZ X3 range of Safety Relays by PILZ introduces your circuit to a safety related interruption wherein the primary applications are typically in potential hazardous environments where you need that quick power cut off. Particularly useful in automated environments ...
Incorporates relay outputs for two hand control applicationsCompact ...
Description:
Incorporates relay outputs for two hand control applicationsCompact and robust designThe enclosure has a protection class rating of IP40 and the terminals are protected to IP20To initiate a dangerous movement, both operators (two-hand control pushbuttons) must be activated within an ...