Pluto Gate-C2 CAN Open CAN, Pluto Safety Bus CAN Gateway, 24 V dc

  • RS-stocknr. 861-5010
  • Fabrikantnummer 2TLA020071R8100
  • Fabrikant ABB
Wetgeving en compliance
Land van herkomst: SE

Pluto Gateways For Network Connection

The gateways are devices for transfer of data in both directions between the Pluto bus and other fieldbuses. They are made in these versions; GATE-P1 for Profibus-DP (733-4836), GATE-D1 for DeviceNet (733-4849), GATE-C1 for CANopen (733-4830), GATE-E1 for Ethernet using Modbus TCP, EtherNet/IP (EIP) or PROFINET (733-4842). A second usage for GATE-D1 and GATE-C1 is as a CAN-bridge (repeater) which transfers CAN telegrams between two CAN-buses. This can be useful when long cables are needed. With CANbridge the usage is not limited to any special protocol such as the Pluto CAN bus system, but it can be used for most CAN bus systems.

All gateways from ABB are mounted on a 35 mm DIN rail
24 Vdc operating voltage
The CAN bus and PROFIBUS are galvanic isolated from each other and from the 24 Vdc supply
The bus connectors have terminals for connection of a cable shield

Kenmerk Waarde
Range Pluto
Series GATE-C2
Type Gateway
For Use With CANopen
Supply Voltage 24 V dc
Field Bus Communication Type CAN Open CAN, Pluto Safety Bus CAN
Messaging I/O Messages, PDO Messages
Connection Type CAN Open, Pluto Safety Bus, Power
Mounting Style DIN Rail
Dimensions 101 x 22.5 x 119 mm
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service