RS PRO, 750VA Isolation Transformer, 230V ac

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

RS PRO Safety Isolating Transformers 230V ac-110V ac

This safety transformer from our own RS PRO brand is high quality, UK manufactured to BSEN (British Standard European Norm) 61588 and fully compliant with reduced low voltage regulations.

Applications

• Safety transformers are most commonly used for increasing low AC voltages at high current or decreasing high AC voltages at low current in electric power applications, and for coupling stages of signal processing circuits.
• Safety transformers could be used for isolation, transmission, distribution and utilization of alternating current electric power

RS PRO

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality, which means you can be confident too.

Standards

BS EN 61558, BS EN 61558-20-23, BS EN 60529 ,RoHS Directive 2011/65/EU

Features and Benefits

• Glass reinforced polyester (GRP) case providing protection to IP44
• 110V centre tapped to earth (CTE) secondary winding
• 3amp thermal magnetic trip (hand resettable) reducing the chance of overload
• 1x 16A 110V Sockets
• Thermal overload protection
• Intermittent rating: maximum ration for operating load at 25% duty cycle (5 minutes on / 15 minutes off)
• 2 metre input mains lead with 13A UK domestic plug

Specificaties
Kenmerk Waarde
Primary Voltage Rating 230V ac
Secondary Voltage Rating 110V
Power Rating 750VA
Plug Type BS 1363
Socket Type BS EN 60309
Weight 10kg
Length 195mm
Width 195mm
Depth 265mm
Dimensions 195 x 195 x 265mm
Mounting Type Portable
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
33 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
123,51
(excl. BTW)
149,45
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 123,51
Related Products
Autowound transformers for step-up or step-down of mains ...
Description:
Autowound transformers for step-up or step-down of mains voltages at 50/60Hz. , Compact construction Full varnish impregnation Fully shrouded Four-hole fixing for permanent installation Terminal blocks with protective covers (except 50VA which has leads) 100% electrical and flash tested (2kV ...
Safety isolating and isolating control transformersTwin secondary winding ...
Description:
Safety isolating and isolating control transformersTwin secondary winding for series or parallel connection63,100,160 and 250VA transformers can be mounted on standard 35mm DIN railAll units have 4 hole panel mount fixingsEasy installation 4mm² cage clamp terminalsInsulation catagory Class B.
Brought to you by Block, the TT3 series ...
Description:
Brought to you by Block, the TT3 series of 3 phase transformers are highly efficient and feature low heat loss. Fitted with easy-to-install mounting holes, the TT3 series transformers also feature screw terminal connections and integrated lifting eyes. • Safe ...
Sine wave output voltageSelectable output frequency: 50/60HzHigh input-output ...
Description:
Sine wave output voltageSelectable output frequency: 50/60HzHigh input-output isolation 3000VrmsThree-phase synchronizationRemote inhibitInput and output alarm Railway version EN50155 Fire and smoke: EN45545-2 approvedDNV GL maritime type aproved product.