SAW Components 947.5MHz 50Ω 3.1dB SMD SAW Filter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

SF Series SAW broadcast IF filters

A range of surface acoustic wave devices used to bandpass filter for use in broardcast IF stages

Signal/Line/Noise and Feedthrough – PCB Mount (SMT)

Unless explicitly stated, the filters in this range have an Operating Temperature Range of between -25°C and 85°C.

Specificaties
Kenmerk Waarde
Series SF
Typical Centre Frequency 947.5MHz
Load Impedance 50Ω
Maximum Insertion Loss 3.1dB
Mounting Type Surface Mount
Dimensions 3.8 x 3.8 x 1.33mm
Depth 3.8mm
Height 1.33mm
Length 3.8mm
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each
2,46
(excl. BTW)
2,98
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 2,46
10 - 49
€ 2,38
50 - 249
€ 2,29
250 - 499
€ 2,20
500 +
€ 2,11
Verpakkingsopties
Related Products
The B86301U Series from EPCOS are optimised for ...
Description:
The B86301U Series from EPCOS are optimised for motor cables and full load operations. These EMC filters feature natural cooling and have a 3 phase dv/dt output reactor construction. Complying with IEC60076-6, the 8A-24A options offer IP20 protection, the 45A-112A ...
Motor drive filters suitable for a wide range ...
Description:
Motor drive filters suitable for a wide range of industrial motor applicationsIHF variants offer three phase and neutral connection with low leakage current, (≤3.5mA)MDF variants offer higher performance for applications where leakage current is not a limiting factor (three phase ...
High attenuation over a wider frequency range from ...
Description:
High attenuation over a wider frequency range from high inductance valuesSIFI-E range gives a better overall attenuation performance at frequencies below 150kHzIdeally suited for switch mode power supplies in industrial electronic equipmentLow leakage currentAluminium case.
Phase-angle power controllers generate Radio Frequency Interference (RFI).This ...
Description:
Phase-angle power controllers generate Radio Frequency Interference (RFI).This interference must be suppressed to comply with the relevant ,EMC standards or to prevent interaction with other circuits. Complements the UAL range of mains controlled power regulatorsSuitable for 220-240Vac supplies.