RS PRO Nitrile Rubber Seal, 17.28mm Bore , 23.8mm O.D , -10 +80°C

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Nitrile Rubber Metric O-Rings

RS Pro metric O-Rings made from Nitrile, the most widely used elastomer in the seal industry. These O-Rings have an excellent resistance to petroleum products and work well in either low or high temperatures. Nitrile is highly resistant to abrasion and is an ideal choice in most industries.

Features and Benefits

• Nitrile rubber material
• Hardness 70 shore A
• Continuous operating temperature -40°C to 110°C, short term to 135°C
• Resistant to mineral hydraulic oils and greases
• Tolerance BS4518

Caution

NBR is not suitable with Esters, Ozone, Retones, Aldehydes,Chlorinated and Nitro Carbons

'O' Rings

'O' ring seals available in a choice of three materials to suit different applications. All 'O' rings are supplied in bags of 50.,The Nitrile 'O' rings are available in both Metric and Imperial sizes. Imperial sizes are to BS1806, Metric sizes are to BS4518.

Specificaties
Kenmerk Waarde
Inside Diameter 17.28mm
Outside Diameter 23.8mm
Thickness 2.03mm
Type Bonded Seal
Material Nitrile Rubber
Minimum Operating Temperature -10°C
Maximum Operating Temperature +80°C
36 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
13 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 50
13,11
(excl. BTW)
15,86
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 4
€ 13,11
€ 0,262
5 - 9
€ 12,59
€ 0,252
10 - 24
€ 12,30
€ 0,246
25 +
€ 12,03
€ 0,241
*prijsindicatie
Related Products
RS Pro metric O-Rings made from Nitrile, the ...
Description:
RS Pro metric O-Rings made from Nitrile, the most widely used elastomer in the seal industry. These O-Rings have an excellent resistance to petroleum products and work well in either low or high temperatures. Nitrile is highly resistant to abrasion ...
Also known as oil seals, these seals are ...
Description:
Also known as oil seals, these seals are ideal for excluding dirt, dust, water or any other contaminant whilst retaining lubricant in rotary shaft equipment. They are generally used as a means of protecting the bearings of rotating shafts. Replaceable ...
These seals prevent fluid flowing from adjoining housings.This ...
Description:
These seals prevent fluid flowing from adjoining housings.This range performs the dynamic sealing that takes place when two parts move one against the other.These seals for rotating shafts consist of three parts: seal armature, spring and nitrile elastomer.
Shaft seals suitable for LPBR linear plain bearings ...
Description:
Shaft seals suitable for LPBR linear plain bearings and LBBR linear ball bearings.