SKF NBR Seal, 65.1mm ID, 88.9mm OD, 11.13mm
- RS-stocknr.:
- 587-431
- Fabrikantnummer:
- 25597
- Fabrikant:
- SKF
Subtotaal (1 verpakking van 5 eenheden)*
€ 111,84
(excl. BTW)
€ 135,33
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 06 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Verpakking(en) | Per verpakking | Per stuk* |
|---|---|---|
| 1 + | € 111,84 | € 22,368 |
*prijsindicatie
- RS-stocknr.:
- 587-431
- Fabrikantnummer:
- 25597
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 65.1mm | |
| Outside Diameter | 88.9mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 11.13mm | |
| Seal Material | NBR | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 65.1mm | ||
Outside Diameter 88.9mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 11.13mm | ||
Seal Material NBR | ||
- Land van herkomst:
- MX
The SKF Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. Seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
For oil or grease
With garter spring
WAVE lip creates higher pumping rate
WAVE lip has less friction between shaft and lip
WAVE lip has a lower temperature at the contact point
With garter spring
WAVE lip creates higher pumping rate
WAVE lip has less friction between shaft and lip
WAVE lip has a lower temperature at the contact point