SKF Metal-Cased with Sealant Coated Rotary Shaft Seal, 19.05 mm ID, 31.75 mm OD

Subtotaal (1 verpakking van 10 eenheden)*

€ 48,08

(excl. BTW)

€ 58,18

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Bestellingen onder € 75,00 (excl. BTW) € 5,95.
Tijdelijk niet op voorraad
  • Verzending vanaf 20 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Verpakking(en)
Per verpakking
Per stuk*
1 +€ 48,08€ 4,808

*prijsindicatie

RS-stocknr.:
587-770
Fabrikantnummer:
7443
Fabrikant:
SKF
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SKF

Product Type

Rotary Shaft Seal

Material

Metal-Cased with Sealant Coated

Inside Diameter

19.05 mm

Outside Diameter

31.75 mm

Minimum Operating Temperature

-40°C

Thickness

6.35mm

Maximum Operating Temperature

100°C

Standards/Approvals

No

Land van herkomst:
MX
The SKF Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. It is designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, a garter spring to optimize sealing against the shaft, and a dust lip to improve contamination exclusion. It features the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.

For oil or grease

WAVE lip has less friction between shaft and lip

WAVE lip has a lower temperature at the contact point

Durable construction enhances lifespan