SKF Fluoroelastomer Rotary Shaft Seal, 8 mm ID, 18 mm OD
- RS-stocknr.:
- 587-783
- Fabrikantnummer:
- 8X18X5 HMSA10 V
- Fabrikant:
- SKF
Subtotaal (1 verpakking van 20 eenheden)*
€ 86,36
(excl. BTW)
€ 104,50
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Informatie over voorraden is momenteel niet toegankelijk
Verpakking(en) | Per verpakking | Per stuk* |
|---|---|---|
| 1 + | € 86,36 | € 4,318 |
*prijsindicatie
- RS-stocknr.:
- 587-783
- Fabrikantnummer:
- 8X18X5 HMSA10 V
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Rotary Shaft Seal | |
| Material | Fluoroelastomer | |
| Inside Diameter | 8 mm | |
| Outside Diameter | 18 mm | |
| Minimum Operating Temperature | -25°C | |
| Thickness | 5mm | |
| Maximum Operating Temperature | 200°C | |
| Standards/Approvals | DIN 3760, ISO 6194 | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Rotary Shaft Seal | ||
Material Fluoroelastomer | ||
Inside Diameter 8 mm | ||
Outside Diameter 18 mm | ||
Minimum Operating Temperature -25°C | ||
Thickness 5mm | ||
Maximum Operating Temperature 200°C | ||
Standards/Approvals DIN 3760, ISO 6194 | ||
- Land van herkomst:
- CN
The SKF Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. It is designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer. A garter spring in the seal and a non-contacting auxiliary lip optimize the sealing against the shaft also in polluted environment.
High pumping rate
Higher contamination exclusion with dust lip
Accommodate misalignment
Durable construction enhances lifespan