ifm electronic E70230 Series Connector Hood, 4 Port

Bekijk alle Sensor Connectivity

Subtotaal (1 verpakking van 6 eenheden)*

€ 26,058

(excl. BTW)

€ 31,53

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 12 stuk(s) klaar voor verzending
  • 126 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
6 +€ 4,343€ 26,06

*prijsindicatie

RS-stocknr.:
741-7525
Fabrikantnummer:
E70230
Fabrikant:
ifm electronic
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

ifm electronic

Product Type

Connector Hood

Number of Ports

4

Maximum Operating Voltage

11V

Series

E70230

Housing Material

Copper Alloy Tin Plated

Maximum Operating Temperature

70°C

Standards/Approvals

No

Minimum Operating Voltage

5V

Output Type

M12 Connector

Land van herkomst:
RO

Accessories


Actuator Sensor Interface (AS-I)


Actuator Sensor Interface, AS-I


AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.

A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).

By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.

The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.

Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I


Replaces hard wiring

High data speed

Low cost installation

Intelligent diagnostics

Easy to learn and install

Highly flexible

Can connect to other fieldbus systems

User-friendly

Off-site pre-assembly and test

Easy maintenance

Faster on-site commissioning

Host or stand alone use

Able to use standard sensors and actuators (using modules)

Gerelateerde Links