- RS-stocknr.:
- 143-8870
- Fabrikantnummer:
- STEVAL-STLCS02V1
- Fabrikant:
- STMicroelectronics
13 op voorraad - levertijd is 4 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 34,94
(excl. BTW)
€ 42,28
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 34,94 |
5 - 9 | € 34,02 |
10 - 24 | € 33,15 |
25 + | € 32,32 |
- RS-stocknr.:
- 143-8870
- Fabrikantnummer:
- STEVAL-STLCS02V1
- Fabrikant:
- STMicroelectronics
Wetgeving en compliance
Productomschrijving
STEVAL-STLCS0xV1 SensorTile Wireless Sensor Board
The STEVAL-STLCS0xV1 SensorTile integrates movement sensing, barometric pressure sensing, an electronic compass, a MEMS microphone, STM32 MCU and a BlueNRG BLE network processor on a tiny PCB. It supports development of monitoring/tracking applications such as IoT standalone sensor nodes linked to iOS™ or Android™ smartphones.
Module Features
80MHz STM32L476JG Cortex M4F low-power MCU with 1MB Flash memory, 128KB RAM
LSM6DSM iNEMO inertial module: 3D accelerometer and 3D gyroscope
LSM303AGR eCompass module: 3D accelerometer and 3D magnetometer
LPS22HB MEMS digital barometer: 260 to 1260hPa absolute pressure
MP34DT04 MEMS digital microphone with 64dB SNR
BlueNRG-MS Bluetooth 4.1 network processor
BALF-NRG-01D3 50Ω balun with integrated harmonic filter
Chip antenna
LD39115J18R +1.8V @ 150mA LDO regulator
SWD interface for firmware debugging/programming
External interfaces: UART, SPI, SAI, I²C, DFSDM, USB OTG, ADC, GPIO
Available with plug-in and/or solder host board connection
Power supply: +2.0 to +5.5Vdc
Dimensions: 13.5 x 13.5mm
LSM6DSM iNEMO inertial module: 3D accelerometer and 3D gyroscope
LSM303AGR eCompass module: 3D accelerometer and 3D magnetometer
LPS22HB MEMS digital barometer: 260 to 1260hPa absolute pressure
MP34DT04 MEMS digital microphone with 64dB SNR
BlueNRG-MS Bluetooth 4.1 network processor
BALF-NRG-01D3 50Ω balun with integrated harmonic filter
Chip antenna
LD39115J18R +1.8V @ 150mA LDO regulator
SWD interface for firmware debugging/programming
External interfaces: UART, SPI, SAI, I²C, DFSDM, USB OTG, ADC, GPIO
Available with plug-in and/or solder host board connection
Power supply: +2.0 to +5.5Vdc
Dimensions: 13.5 x 13.5mm
RS Product Codes
125-3924 STEVAL-STLKT01V1 SensorTile Evaluation Kit
Note
The module can be built into a production device, but will require screening and testing to prove compliance with regional RF emissions regulations.
Sensor Solution Evaluation Boards, STMicroelectronics
Specificaties
Kenmerk | Waarde |
---|---|
Sensor Technology | Motion Sensor |
Kit Classification | Data Capture Card |
Kit Name | SensorTile |