Omron Mounting Bracket for use with E3FA Series, E3RA Series

  • RS-stocknr. 768-6074
  • Fabrikantnummer E39-L182
  • Fabrikant Omron
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Mounting Brackets for E3FA & EFRA Series Photoelectric Sensors

Mounting brackets for the Omron E3FA & EFRA series photoelectric sensors.

E3F2 Series Barrel

Output can be configured by wiring either ’light ON’ or ’dark ON’
Built in amplifier
Short circuit and reverse polarity protection
M18 DIN size cylindrical housing

Specificaties
Kenmerk Waarde
Accessory Type Mounting Bracket
For Use With E3FA Series, E3RA Series
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
7,55
(excl. BTW)
9,14
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 7,55
Related Products
Die-cast zinc brackets attached with a single screwSmall ...
Description:
Die-cast zinc brackets attached with a single screwSmall and large sizes, to fit a wide range of cylinders: For 32 to 100mm see stock no. 313-2324; For 63 to 160mm diameters see stock no. 313-2346.
Single-pole electrode holders are useful where electrodes require ...
Description:
Single-pole electrode holders are useful where electrodes require spacing apart to avoid clogging. The unit may be screwed in place (M18 thread) and is capable of holding the electrode using the two M4 screws. Suitable for use up to 29kg/cm2 ...
Telemecanique Sensors OsiSense XUW vision sensors easily integrate ...
Description:
Telemecanique Sensors OsiSense XUW vision sensors easily integrate into machinery and are dedicated to the inspection of manufactured parts. They allow checking of high production rate operations and ensure high repeat accuracy. These XUW sensors can also be used to ...
For threaded or non-threaded sensorsProvides easy repositioning of ...
Description:
For threaded or non-threaded sensorsProvides easy repositioning of the sensor in relation to the target. Sensors are firmly clamped in place.Manufactured from PBT.