BALLUFF 4-Pin M12 Connector Male IO-Link Sensor/Actuator Hub for use with Harsh Industrial IO-Link

  • RS-stocknr. 135-0304
  • Fabrikantnummer BNI IOL-104-000-K006
  • Fabrikant BALLUFF
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: HU
Productomschrijving

BNI Series IO-Link Sensor Hub

Balluff BNI series IO-Link sensor hub provides communication to a host interface master through IO-Link protocol. The input or output data from the IO-Link master shows the latest state of connected sensors, or communicates the desired state of actuators.

IO-Link communication
Status LEDs
IP67 Rated

Balluff IO-Link Masters and Hubs

Specificaties
Kenmerk Waarde
Connection Type M12 4-Pin - 8 x M12 5-Pin
Accessory Type IO-Link Sensor/Actuator Hub
Connection Gender Male
For Use With Harsh Industrial
Interface IO-Link
Voltage Rating 18 → 30.2 V dc
Current Rating 1.2 A
Jacket Material PA
Orientation Straight
Operating Temperature Range -5 → +55 °C
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
120,67
(excl. BTW)
146,01
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 120,67
Related Products
Wiring compatible with PG 9 certification.0.5 m wire ...
Description:
Wiring compatible with PG 9 certification.0.5 m wire output connections.For 0.2m wire connections see RS 161-7047 or RS 161-7053M12 output.
The Brad I/O module is a PNP type ...
Description:
The Brad I/O module is a PNP type M12 4-pin and M12 5- pin B connection type used with PROFINET controller IO-Link. It is designed for factory automation machine builders which brings versatility and cost-savings to complex system designs through ...
Brad PROFINET IO-Link Harsh IO Modules, designed for ...
Description:
Brad PROFINET IO-Link Harsh IO Modules, designed for factory automation machine builders, bring versatility and cost-savings to complex system designs through PROFINET controllers. Ready for both America and Europe regionsUltra-Lock® M12 ConnectorsSurpasses performance and reliability of traditional threaded ...
Micro-Change (M12) Single-Ended Cordset, 4 Poles, Female (Straight) ...
Description:
Micro-Change (M12) Single-Ended Cordset, 4 Poles, Female (Straight) to Pigtail, 20 AWG, 5.0m (16.40') Length.