- RS-stocknr.:
- 202-3114
- Fabrikantnummer:
- DYSW-8-14-Y1F
- Fabrikant:
- Festo
20 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 108,88
(excl. BTW)
€ 131,74
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 108,88 |
- RS-stocknr.:
- 202-3114
- Fabrikantnummer:
- DYSW-8-14-Y1F
- Fabrikant:
- Festo
Wetgeving en compliance
- Land van herkomst:
- DE
Productomschrijving
Festo Shock Absorber - DYSW Series - DYSW-8-14-Y1F
This shock absorber from Festo uses hydraulic oil to dissipate shock energies. It can handle a maximum impact speed of three metres per second. The component is self-adjusting, and its single-acting operation smoothly and gradually stops movement without causing bounce-back. The high-alloy steel construction of the housing and piston rod ensures good resistance to corrosion for safety and long use in tough industrial environments. This device's slowly increasing cushioning force-curve makes it suited to low-vibration applications.
Body length of 66.05 mm
Cushioning length of 14 mm
Overall length of 80.05 mm
Weight of 42 g
Maximum energy capacity of 21000 Nm per hour
Maximum energy capacity of 4 Nm per cycle
Minimum operating temperature of -10°C
Maximum operating temperature of +80°C
Cushioning length of 14 mm
Overall length of 80.05 mm
Weight of 42 g
Maximum energy capacity of 21000 Nm per hour
Maximum energy capacity of 4 Nm per cycle
Minimum operating temperature of -10°C
Maximum operating temperature of +80°C
Range Information
The DYSW series is Festo's durable and maintenance-free range of industrial shock absorbers
Cushioning components are available in a variety of sizes and stroke lengths
They have a slowly increasing cushioning force curve with a long cushioning stroke and permit short cycle times
Designed with a continuous thread with an internal hex, they're easy to mount onto any industrial production system
The range is corrosion-resistant against condensation in indoor applications
Cushioning components are available in a variety of sizes and stroke lengths
They have a slowly increasing cushioning force curve with a long cushioning stroke and permit short cycle times
Designed with a continuous thread with an internal hex, they're easy to mount onto any industrial production system
The range is corrosion-resistant against condensation in indoor applications
The Festo push-in sleeve has push/pull principle of structure which used PBT type of housing material. Its nominal size is 7.1mm and can be assembled in any position.
Container size 20
Ambient temperature -10 to 80 °C
Ambient temperature -10 to 80 °C
Specificaties
Kenmerk | Waarde |
---|---|
Body Length | 66.05mm |
Overall Length | 80.05mm |
Shock Absorber Type | Shock Absorber |
Manufacturer Series | DYSW |
Maximum Energy Capacity Per Hour | 21000Nm |
Maximum Energy Capacity Per Cycle | 4Nm |
Minimum Operating Temperature | -10°C |
Maximum Operating Temperature | +80°C |
- RS-stocknr.:
- 202-3114
- Fabrikantnummer:
- DYSW-8-14-Y1F
- Fabrikant:
- Festo