Phoenix Contact MINI MCR-2-TC-UI-PT, Thermocouple Signal Conditioner, Temperature ATEX, -250 → 2500 °C Input

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

MINI MCR - transducer for Pt100 and thermocouples

For Pt100 or thermocouples
Measurement range and output signal configurable
3-way isolation
Diagnostic LED for analysing faults
Power supply via feed terminal and mounting rail bus connector (stock no. 489-2825) possible
Screw or spring-loaded connector
Overall width 6.2 mm

Approvals

  CE

Specificaties
Kenmerk Waarde
Input Type Temperature
Output Type Current, Voltage
Signal Conditioner Type Thermocouple
Input Range -250 → 2500 °C
Output Range 0 → 21 mA, 10 → 10.5 V
Supply Voltage 9.6 → 30 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -40°C
Maximum Operating Temperature +70°C
Termination Push-In
Series MINI MCR-2-TC-UI-PT
Standards Met CE Compliant, CUL, CULus, EAC, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-6-4, GL, IEC 61010-1, UL
Hazardous Area Certification ATEX
Number of Channels 1
Special Features Supports NFC Communication
Operating Temperature Range -40 → +70 °C
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was € 196,56
149,87
(excl. BTW)
181,34
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 149,87
Related Products
MINI MCR series 4-way signal duplicators for electrical ...
Description:
MINI MCR series 4-way signal duplicators for electrical isolation and doubling of analog signals with spring-cage connection. Power supply possible via the foot element (T-connector)Duplication of a standard analog signal on two current outputsHighly-compact isolating amplifier for electrical isolation, ...
MINI MCR series passive isolators with 2 channels, ...
Description:
MINI MCR series passive isolators with 2 channels, for the electrical isolation of current signals without auxiliary power. Spring-cage connectionAuxiliary voltage not requiredSupplied by an input loopHighly-compact 2-wire passive isolators for electrical isolation and filtering of standard analog signals.
Phoenix Contact MINI MCR series universally configurable frequency ...
Description:
Phoenix Contact MINI MCR series universally configurable frequency transducer for electrical isolation and conversion of frequency and PWM signals to standard analogue signals with transistor switching output. DIP switch configurationFault monitoringNFC communication.
MINI MCR series limit value switches, with adjustable ...
Description:
MINI MCR series limit value switches, with adjustable hysteresis and delay time and spring-cage connection. Power supply possible via the foot element (T-connector)Status and error indication via two diagnostic LEDsPDT relay at output3-way isolationLimit value can be freely adjusted via ...