Wago 857, Amplifier Isolation Amplifier, Current, Voltage

  • RS-stocknr. 180-3043
  • Fabrikantnummer 857-424
  • Fabrikant Wago
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Isolation amplifier, Current and voltage input signal, Supply voltage: 24 VDC, 6 mm module width

Specificaties
Kenmerk Waarde
Input Range 0 1 V, 0 10 mA, 0 10 V, 0 20 mA, 0 5 V, 1 5 V, 2 10 mA, 2 10 V, 4 20 mA
Output Range 0 10 mA, 0 10 V, 0 20 mA, 2 10 mA, 2 10 V, 4 20 mA
Supply Voltage 24 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +70 °C
Operating Temperature Range -40 +70 °C
Series 857
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 27-02-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
437,00
(excl. BTW)
528,77
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 437,00
Related Products
The Keysight 33502A offers engineers in R&D and ...
Description:
The Keysight 33502A offers engineers in R&D and manufacturing a convenient way of using their existing function generators to create accurate and reliable signal sources at higher voltages. The 33502A can be independently configured with input coupling (AC, DC) and ...
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, ...
Description:
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, amplify, filter and electrically isolate standard analogue signals. Clipping capability provides analogue signal limitation to output end values Calibrated scale switching PC configuration interface Safe 3 way isolation with 4 kV test ...
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, ...
Description:
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, amplify, filter and electrically isolate standard analogue signals. Clipping capability provides analogue signal limitation to output end values Calibrated scale switching PC configuration interface Safe 3 way isolation with 4 kV test ...
This signal duplicator can be mounted on DIN ...
Description:
This signal duplicator can be mounted on DIN rail individually, or with other units. The housing is 102.5mm high by 6.2mm. The performance specifications are similar to standard sized MCR products.,The inputs are listed as: 0-20mA, 4-20mA, 1-5V, 0-10V etc, ...