Tedea Huntleigh Voltage to Current Signal Conditioner, Voltage 5 → 50 mV Input

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: US
Productomschrijving

433 Series Load Cell Signal Conditioners

Tedea Huntleigh Model 433 self contained signal conditioner for bridge type instrumentation. It contains a precision amplifier with isolated, filtered output and a highly regulated, low noise adjustable output bridge excitation source. The unit is completely encapsulated for use in rugged environments.

Strain gage bridge signal conditioner
Isolated 4 to 20mA or 0 to 20mA loop output
Bridge balance with large tare offset capability
Excitation supply capable of driving up to 4 or 5 load cells
Rugged epoxy encapsulated design
AC powered

//media.rs-online.com/t_line/L206026-01.gif
Specificaties
Kenmerk Waarde
Input Type Voltage
Output Type Current
Signal Conditioner Type Voltage to Current
Input Range 5 → 50 mV
Supply Voltage 115 V ac
Minimum Operating Temperature -25°C
Maximum Operating Temperature +55°C
Operating Temperature Range -25 → +55 °C
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
752,56
(excl. BTW)
910,60
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 752,56
Related Products
These devices comprise a movable nickel iron core ...
Description:
These devices comprise a movable nickel iron core and three coils - one for energisation and two for pick-up. They need to be driven by a sine wave to produce an output amplitude and phase directly proportional to the position ...
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, ...
Description:
Wago 857 series JUMPFLEX configurable isolation amplifiers convert, amplify, filter and electrically isolate standard analogue signals. Clipping capability provides analogue signal limitation to output end values Calibrated scale switching PC configuration interface Safe 3 way isolation with 4 kV test ...
Wago 857 series JUMPFLEX millivolt signal conditioner converts ...
Description:
Wago 857 series JUMPFLEX millivolt signal conditioner converts input millivolt signals into an analogue standard signal on the output side. PC configuration interface Switching between measurement ranges is calibrated Clipping capability allows analogue signal limitation to output end values Safe ...
EYC-Tech DPT02 series digital universal input signal converters ...
Description:
EYC-Tech DPT02 series digital universal input signal converters measure a wide range of input types and convert these into an analogue output. The DPT02 features a 3-digit readout display and simple keypad for programming the signal output and scale. 3-digit ...