Phoenix Contact MACX MCR-EX-SL-2NAM-RO, Galvanic Isolator,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Ex-i NAMUR Isolating Amplifier, 2-channel

For operating proximity sensors and switches in Ex areas
The signals are transmitted via relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2

Approvals

CE-compliant

Specificaties
Kenmerk Waarde
Supply Voltage 19.2 → 30 V dc
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Operating Temperature Range -20 → +60 °C
Series MACX MCR-EX-SL-2NAM-RO
Number of Channels 2
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
16 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
113,23
(excl. BTW)
137,01
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 113,23
Related Products
The intrinsically safe interface blocks of the MACX ...
Description:
The intrinsically safe interface blocks of the MACX Analog Ex series offer the widest range of functions in the narrowest design. Ex-i signal conditioner for many applicationsElectrical 3-way isolationScrew or spring-cage connections are availableIP20 protectionWidth only 12.5 mm.
MINI MCR series passive isolators with 2 channels, ...
Description:
MINI MCR series passive isolators with 2 channels, for the electrical isolation of current signals without auxiliary power. Spring-cage connectionAuxiliary voltage not requiredSupplied by an input loopHighly-compact 2-wire passive isolators for electrical isolation and filtering of standard analog signals.
These isolators can be mounted on DIN rail ...
Description:
These isolators can be mounted on DIN rail individually or with other units. The housings are 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products. No separate supply voltage necessary. Single and dual channel ...
Can can be mounted on DIN rail individually ...
Description:
Can can be mounted on DIN rail individually or with other units. The housing is 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products.,Required a 24Vdc supply, either directly to module terminals or via ...