MikroElektronika MIKROE-2038 DAC3 Click DAC Add On Board for MCP4726 for mikroBUS

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CS
Productomschrijving

DAC 3 click mikroBUS™

The Click accessory modules plug into the mikroBUS sockets in MikroElektronika microcontroller development boards. The DAC3 click add-on board has an on-board MCP4726 IC from Microchip and operates on a 3.3 V or 5 V power supply. The DAC3 click board communicates with the target board MCU through the mikroBUS™ I2C interface (SCL, SDA pins). Applications include motor control, sensor calibration, set point, offset trimming and PC peripherals.

12-bit DAC: MCP4726
Voltage output screw terminals
MCP4726: Integrated EEPROM for storing DAC register and configuration
I2C modes available: Standard (100 kHz), fast (400 kHz) and high-speed (3.4 MHz)
Selectable VREF
Supported in all MikroElektronika compilers
mikroBUS™ is a specially designed pinout standard with SPI, I2C, Analogue, UART, Interrupt, PWM, Reset and power supply pins

Note

Click board comes with the header strips soldered.

Specificaties
Kenmerk Waarde
Converter Type DAC
Featured Device MCP4726
For Use With MikroBUS
Kit Classification Add On Board
Kit Name DAC 3 Click
Resolution 12-bit
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
15,73
(excl. BTW)
19,03
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 15,73
5 - 9
€ 14,79
10 +
€ 13,90
Related Products
The NB6N239SMN Evaluation Board was designed to provide ...
Description:
The NB6N239SMN Evaluation Board was designed to provide a flexible and convenient platform to quickly evaluate, characterize and verify the performance and operation of the NB6N239S. The user's manual provides detailed information on board contents, layout and its use. It ...
The Si5341-EVB evaluation board is designed to evaluate ...
Description:
The Si5341-EVB evaluation board is designed to evaluate the Si5341 Jitter Attenuating Clock Multiplier with Multisynth™ technology, allowing for a smooth transition from Clockbuilder Pro device configuration to performance evaluation. On-board SMA connectors allow for measurement via independent input and ...
The LB1909MC is a low saturation voltage stepping ...
Description:
The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products. Current consumption 0 in standby modeThe compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8ABIP ...
An evaluation board from Analog Devices allowing assessment ...
Description:
An evaluation board from Analog Devices allowing assessment of the HMC547ALC3 SPDT switch. This device is housed in a compact 3x3 mm 16-pad leadless SMT package and features high signal isolation and less than 2 dB insertion loss. The switch ...