Rabbit Semiconductor Rabbit 6000 Microprocessor CP 200MHz Memory Module

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

RCM67xx MiniCore™ Industrial Embedded Device Servers

The ultra-compact MiniCore RCM67xx is ideal for today’s Smart Energy initiatives as well as other applications that require a cost effective web-enabled device server. The RCM67xx series provides up to 6 serial ports, configurable I/O and control features such as PWM. Furthermore, the RCM 67xx series offers a much greater feature set than comparable device servers at a lower cost.
The programming environment, Dynamic C, is an ANSI C compatible development environment that provides a royalty free TCP/IP stack and WiFi support. Various protocols such as ZigBee, Modbus and BACnet are also supported to help reduce development costs and time-to-market. In addition to processor and protocol support, Dynamic C supports the iDigi® platform which provides remote firmware updates and data storage for greater device control and monitoring.

• Rabbit 6000 microprocessor running at up to 200MHz
• 1MB of internal SRAM for program/data storage
• Up to 4MB of serial Flash memory for data logging or web page storage
• 32KB battery-backable SRAM
• 10/100 Ethernet LAN supported
• Pin-compatible with MiniCore IEEE 802.11b/g wireless modules
• Flexible Interface Module (FIM) provides protocol support for CAN bus or SD/SDIO
• 52-pin Mini PCIe edge connector
• Power supply: +3.3Vdc
• Operating temperature range: -40 to +85°C
• Dimensions: 30 x 51mm
• iDigi platform provides cost-effective cloud computing for remote device management

RS Product Codes

761-7361 RCM6700 1MB Flash memory, no RJ45 Ethernet socket fitted 761-7365 RCM6710 1MB Flash memory, RJ45 Ethernet socket fitted
761-7374 RCM6750 4MB Flash memory, no RJ45 Ethernet socket fitted
761-7377 RCM6760 4MB Flash memory, RJ45 Ethernet socket fitted

Development Kits

761-7359 Standard Development Kit for RCM6700 761-7368 DeLuxe Development Kit for RCM6700

Rabbit - Digi International

Embedded Controllers and Device Servers for the Industrial environment.

Specificaties
Kenmerk Waarde
Core Processor Rabbit 6000 Microprocessor
Supported I/O Interfaces Serial
Supported Network Interfaces 10/100 Ethernet
Dimensions 30 x 51 x 18mm
Height 18mm
Maximum Operating Temperature +85 °C
Length 30mm
Width 51mm
Minimum Operating Temperature -40 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 05-03-2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 24)
39,472
(excl. BTW)
47,761
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
24 +
€ 39,472
€ 947,328
*prijsindicatie
Related Products
The Silicon Labs EFR32 Mighty Gecko SLWRB4150B Radio ...
Description:
The Silicon Labs EFR32 Mighty Gecko SLWRB4150B Radio Board supports dual-band operation thanks to the integrated sub-1GHz and 2.4GHz ISM band transceivers. It is designed to be used with a BRD4001A Mainboard that comes with the SLWSTK6000A Wireless Starter Kit, ...
The ARIS board is a hardware and software ...
Description:
The ARIS board is a hardware and software Renesas Synergy platform, ready-to-use on developing Internet of Things (IoT) applications. The system is built around a Renesas Synergy S7 Series high-performance microcontroller. The accelerometer sensor and the gyroscope supply the position ...
Two Telit GNSS receiver module evaluation kits compliant ...
Description:
Two Telit GNSS receiver module evaluation kits compliant with the GPS and QZSS constellations. The SL869-V2S & SL871-S modules use the Satellite Based Augmentation System (SBAS) to increase positional accuracy and also support ephemeris file injection (A-GPS); the on-board software ...
The Trenz electronic is an MPSoC module integrating ...
Description:
The Trenz electronic is an MPSoC module integrating a Xilinx Zynq UltraScale+ ZU9EG. It comes with 4Gb DDR4 SDRAM along with a 64-bit width, 128Mb flash memory for configuration and operation. This board has 20GB transceivers and powerful switch-mode power ...