ABB 25 A Soft Starter PSE Series, IP00, IP20, 7.5 kW

  • RS-stocknr. 732-8330
  • Fabrikantnummer 1SFA897102R7000
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: SE
Productomschrijving

PSE Soft Starter

The PSE softstarter range is the world’s first compact softstarters with Torque Control. This makes the PSE range an excellent choice for pumping application where water hammering normally is a big problem. With its compact design and advanced functionality, the PSE is also a very efficient solution for other common applications such as compressors and fans.

Wide rated operational voltage 208 – 600 Vac
Wide rated control supply voltage 100 – 250 V, 50/60 Hz
Rated operational current 18 to 370 A
Wide ambient temperature range, -25 to +60 ºC
Coated circuit boards for reliable operation in harsh environment
Built-in by-pass on all sizes, saving energy and reducing installation time
User friendly HMI with illuminated language neutral display and four button keypad
Torque control for excellent control of pumps
Current limit, adjustable between 1.5 – 7 x Ie
Motor overload protection with classes 10A, 10, 20 and 30
Motor underload protection to detect pumps running dry
Locked rotor protection, detecting jammed pumps
Kick start to start jammed pumps or conveyor belts
Sophisticated algorithm eliminating the DC-component and there by providing excellent starting performance

Specificaties
Kenmerk Waarde
Phase 3
Current Rating 25 A
Voltage Rating 600 V
Control Voltage 100 250 V
Power Rating 7.5 kW
IP Rating IP00, IP20
Overall Length 245mm
Overall Width 90mm
Overall Depth 185.5mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
Series PSE
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
526,52
(excl. BTW)
637,09
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 526,52
Related Products
The soft starter has become increasingly established as ...
Description:
The soft starter has become increasingly established as an alternative to the star-delta starter. The DS7 is a fully integral part of xStart and all existing components can be used. Designed for normal applications such as pumps, fans and small ...
soft start with soft stopFor motors from 1.5 ...
Description:
soft start with soft stopFor motors from 1.5 kW to 7.5 kW2-phase controlAdjustable ramp time, starting torque and starting ... mountingWidth: 45 mmAdvantages / Customer benefitProtection of the drive unitIntegrated bridging contactor (Bypass)Easy operationComprehensive diagnostic via LED-flashing codes ...
Single phase snatch-free soft start modules provide a ...
Description:
Single phase snatch-free soft start modules provide a compact and simple means of reducing the problems associated with the starting shocks of direct line started single phase induction motors. Reduced cost of transmission components e.g. couplers, due to lower starting ...
An electronic soft start for dc permanent magnet ...
Description:
An electronic soft start for dc permanent magnet and wound field motors running from battery or rectified smoothed dc supplies. The starting current and acceleration are adjustable giving a cost effective method of switching low voltage motors. Reversing versions can ...