Schneider Electric 3 Phase Soft Start - 250 A Current Rating, ATS48 Series, 250 kW Power Rating, 208 → 690 V ac

Wetgeving en compliance
Niet conform
Land van herkomst: MA

Schneider Electric Soft Starters - Altistart 48 Series

Created and designed to operate as a torque limiter on starting, or as a soft start or soft stop unit for three-phase, squirrel cage asynchronous motors. This range of soft starters are controllers with 6 thyristor that enhances the starting performance of asynchronous motors through allowing them to start smoothly, gradually and in a controlled manner. They are compact and easy to install, the Altistart 48 series can be mounted side by side.

Providing machine and motor protection, the Altistart 48 series also offers users functions for communicating and control systems. The soft starter has high-performance algorithms which significantly contribute to its ruggedness, safety and ease of installation and set-up.

Features & Benefits

• Cost-effective solution through the reduction of mechanical stress and improving the availability of the machine
Drive performance functions - constant control of torque, supplied to the motor during acceleration and deceleration which reduced pressure surges. Users can adjust the ramp and starting torque, the starter can be bypassed using a contactor at the end of the starting period whilst maintaining electronic protection. The drive performance functions offer wide frequency tolerance for generator set power supplies and the starter can also be connected to the motor delta terminals in series with each winding
Machine and motor protection functions - built-in motor thermal protection, processing of information from PTC thermal probes and monitoring of start time. This range of starters also has a motor preheating function and protection against underloads and over currents during continuous operation
Integrated functions that facilitate the interaction of the unit into control systems
• Prevents mechanical shocks
• Reduces wear and tear
• Reduces the amount of maintenance work
• Reduces production town time which in turn keeps production level up
• The Altistart 48 is factory-set for the most common operating conditions

Kenmerk Waarde
Phase 3
Supply Voltage 208 → 690 V ac
Current Rating 250 A
Voltage Rating 208 → 690 V ac
Control Voltage 110 → 230 V ac
Power Rating 250 kW
IP Rating IP00, IP20
Overall Length 320mm
Overall Width 380mm
Overall Depth 265mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +40°C
Series ATS48
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 4.428,00
Related Products
Soft starters were developed to overcome the drawbacks ...
Soft starters were developed to overcome the drawbacks of direct on line (DOL) and star-delta starting of single and three phase a.c. induction motors, such as high starting currents, voltage peaks and mechanical snatch.,Soft starters achieve these benefits by controlling ...
Soft starter SIRIUS 3RW30 for standard applications for ...
Soft starter SIRIUS 3RW30 for standard applications for the soft starting of three-phase asynchronous motors.Soft starting, reduction of current peaks, prevention of supply voltage fluctuations during startup, reduction of load on the power supply network, reduction of mechanical load in ...
This range of softstarters have become increasingly established ...
This range of softstarters have become increasingly established as an alternative to the star-delta starter. The DS7 is a fully integral part of xStart and all existing components can be used. Designed for normal applications that feature pumping and ventilation ...