CHIPQUIK Solder Paste, 250g Jar

  • RS-stocknr. 146-6190
  • Fabrikantnummer SMD291AX250T3
  • Fabrikant CHIPQUIK
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: CA
Productomschrijving

Solder Paste in jar 250g (T3) Sn63/Pb37 no clean 90.25% metal.

Printing speeds up to 100mm/sec
Long stencil life
Wide process window
Clear residue
Low voiding
Excellent wetting compatibility on most board finishes
Print grade
Compatible with enclosed print heads
Passes BONO test

Specificaties
Kenmerk Waarde
Package Type Jar
Package Size 250g
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
20 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
40,70
(excl. BTW)
49,25
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 40,70
10 - 19
€ 39,07
20 - 49
€ 37,85
50 +
€ 34,60
Related Products
Tack Flux supplied in 6 2cc Squeeze Tubes ...
Description:
Tack Flux supplied in 6 2cc Squeeze Tubes (same flux as SMD291). Low viscosity no-clean synthetic paste flux. Has a pleasant odor. Ideal for all rework, solder, de-solder and reflow applications Non-corrosive, non-conductive, no-clean Tack flux will not run all ...
Tack Flux in 8cc Squeeze Tube (same flux ...
Description:
Tack Flux in 8cc Squeeze Tube (same flux as SMD291). Low viscosity no-clean synthetic paste flux. Has a pleasant odor. Ideal for all rework, solder, de-solder and reflow applicationsNon-corrosive, non-conductive, no-cleanTack flux will not run all over PCB when appliedHas ...
Tack Flux no-clean water-washable 10cc syringe w/plunger & ...
Description:
Tack Flux no-clean water-washable 10cc syringe w/plunger & tip. Low viscosity no-clean water-washable synthetic paste flux. Has a pleasant odor. Ideal for all rework, solder, de-solder and reflowapplicationsNon-corrosive, non-conductive, no-clean, water-washableTack flux will not run all over PCB when appliedHas ...
MOB39 Solder Flux Gel is for descaling surfaces ...
Description:
MOB39 Solder Flux Gel is for descaling surfaces prior to application of solder paste in stencil printing or spot application processes.It is also used for repairing printed circuit boards.Non-corrosive residues avoid needing to clean the printed circuit board after soldering. ...