Metcal PCB Work Holder, 205 x 155 x 65mm for use with PCT-100 Focused Convection Pre-heater

  • RS-stocknr. 420-962
  • Fabrikantnummer BH-100
  • Fabrikant Metcal
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

PCT-100 Focused Convection Pre-heater & Circuit Board Holder

The PCT-100 is designed to provide extra heat capacity for demanding applications such as lead free, multi-layered boards and assemblies with large ground plates by directly targeting the underside of the PCB. This direct targeting provides a thermal boost for processes such as soldering and hot air rework and leads to an substantial improvement in process time.

Quick ramp to temperature, increased productivity
Controlled cool-down eliminates thermal shock to PCB’s and components
Input voltage: 230V
Heater Rating: 450W
Airflow: 10.2CFM
Control Temperature: Variable up to 300°C
Weight: 1.6kg
Dimensions: 205(L) x 155(W) x 65(H)mm
ESD Safe

Approvals

cTUVus, CE

Heating Plates - OKI/ Metcal

Specificaties
Kenmerk Waarde
Type Circuit Board Holder
For Use With PCT-100 Focused Convection Pre-heater
Dimensions 205 x 155 x 65mm
Length 205mm
Width 155mm
Height 65mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 12-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
442,70
(excl. BTW)
535,67
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 442,70
Related Products
A range of PCB Mounted Battery Holders:718-8457 Battery ...
Description:
A range of PCB Mounted Battery Holders:718-8457 Battery Connector Assembly, Surface Mount, Top Load, accepts CR2032 Battery718-8472 Battery Connector Assembly, Through Hole Mount, Top Load, accepts CR2032 Battery793-6877 Insert Assembly, 5 Position, Single Key, Dovetail Locator,5 mm Centreline, 7.2 V ...
Totally self contained (no external PSU)Can be used ...
Description:
Totally self contained (no external PSU)Can be used as a stand alone pre heat solutionLow profile (only 70mm)Rapid heating ceramic platesNon contact safety mashPerfect for lead free reworkHigh & low power settings50°C to 400°C temperature RangeAvailable in 600W or 1200W ...
A robust universal device for professional useNo annoying ...
Description:
A robust universal device for professional useNo annoying dust from cutting and no static chargingFor panel thicknesses → 100 mm and profile cutsReady for use in 10 secondsMains voltage: 230 V; 50 HzPower consumption: 100 WPower up/down times: 12 s ...
Useful rework preparation toolTemperature controlled 50°C to 450°C80W ...
Description:
Useful rework preparation toolTemperature controlled 50°C to 450°C80W Power SourceCan be used to tin wire ends & leads Warm-up time approximately 7 minutesCan be driven by any suitable rated ’Temtronic’ power unit or rework stationSuitable for use with WS80 stock ...