Stannol 1mm Wire Lead solder, +217°C Melting Point

  • RS-stocknr. 133-5617
  • Fabrikantnummer 810837
  • Fabrikant Stannol
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Stannol Kristall series

Stannol Kristall solder wires have been specially formulated to complement No Clean wave and reflow soldering processes. They are also applicable to repair operations carried out after a cleaning process, eliminating the need for further cleaning. Stannol Kristall solder wires provide fast soldering on copper and brass surfaces and solder coated materials. Activity of the halide activated versions on nickel is also good depending on the state of oxidation of the nickel finish. The good thermal stability of Stannol Kristall fluxes means that they are also suited to soldering applications requiring high melting temperature alloys. The resin and flux systems are designed to leave relatively low residues and to minimise residual activity. This is achieved by ensuring some decomposition and volatilisation takes place during the soldering process. In some situations, this may generate visible fuming but in all cases, rosin fumes must be removed from the breathing zone of operators.

Features & Benefits

• Fast soldering (wide range of activities to suit all applications) • Good spread (on copper, brass and nickel)
• Clear residues
• Heat stable (low spitting)
• Mild odour

Specificaties
Kenmerk Waarde
Wire Diameter 1mm
Model Number Kristall 511
Product Form Wire
Melting Point +217°C
Flux Type Rosin
Product Weight 250g
Flux Content Percent 2.7 %, 3 %
24 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
48,34
(excl. BTW)
58,49
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 48,34
10 - 19
€ 46,40
20 - 49
€ 44,95
50 +
€ 41,09
Related Products
RA soldering wire with 5 activated colophony cores ...
Description:
RA soldering wire with 5 activated colophony cores with 2.5% F-SW 26 fluxOutstanding wetting and spreading properties, also suitable for difficult solders in electrical engineering and electronicsHigh-purity alloys for reliable solder joints.
Sn60Pb40 soldering wire with 1 % halogen-free active ...
Description:
Sn60Pb40 soldering wire with 1 % halogen-free active flux core F-SW 34, No CleanFor use in electronic engineering, especially in SMD technologySolid at 183 °C, liquid at 190 °C.
The electronic solder wire HS10 is a proven ...
Description:
The electronic solder wire HS10 is a proven and reliable product of Stannol research, which was developed to meet high-quality requirements in industrial electronic production and for quick rework. The solder wire HS10 is efficient by its high activity, which ...
5-core Crystal 511 solder wire comprising a balance ...
Description:
5-core Crystal 511 solder wire comprising a balance of resins and activators to ensure maximum activity and leave only small quantities of clear residue.This 511 flux effectively brazes bare copper, brass, nickel, tin / lead finishes as well as oxidised ...