440G-T Solenoid Interlock Switch Power to Unlock 24 V ac/dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DO
Productomschrijving

TLS-GD2 Solenoid Interlock Switch, for Demanding Applications

Features & Benefits

Note

The TLS-GD2 is a positive mode, tongue operated guard locking interlock switch that locks a machine guard closed until power is isolated and ensures that it remains isolated while the guard is open. The switch has three safety (N.C.) contacts and two auxiliary (N.O.) contacts. The head of this interlock switch has two entry slots and it can be rotated to provide four actuator entry points. A blanking plug is provided to seat the unused slot.

The guard may only be opened when a signal is applied to the TLS-GD2 internal solenoid which releases the lock mechanism. Therefore this solenoid interlock switch is ideal for machines which do not stop immediately or where premature interruption of the machine could cause damage to tooling and components or cause an additional hazard.

The safety switch is available in three types. The TLS-1 GD2 and TLS-3 GD2 incorporate a power-to-release function. Two manual release points with security screws allow the locked TLS-GD2 to be released in emergencies. An optional lid-mounted key-release style can also be supplied. The TLS-2 GD2 has a power-to-lock function. Each type of switch has five sets of contacts of various forms and are suitable for use with PLCs.
The TLS-1 GD2 and TLS-3 GD2 are both available with escape release options. They are intended for machine guarding with full body access. The switch is installed so that the escape release push button on the rear side is accessible from inside the hazardous area. This allows the intentional unlocking of the TLS-GD2 from inside a hazardous area, providing a means of escape for a person who may become trapped.
A stainless-steel actuator guide is fitted to protect the switch from actuator damage due to poor guard alignment or guard wear. TLS-GD2 has an ingress protection rating of IP69K making it suitable for harsh wash down applications as found in the food and beverage, pharmaceutical, solar and semiconductor industries.

TLS-3 specially designed to eliminate the problems of lockout when interfacing solenoid locking switches into dual channel safety relays.

Features & Benefits

Power-to-release or power-to-lock
High locking force £2000 N (450 lb)
Five contacts: 2 NC & 1 NO for door position monitoring 1 NC & 1 NO or 2 NC for lock monitoring
Rotatable head: 4 possible actuator entry positions
Lid mounted status indication
3 manual release points with security screws for use in the event of an emergency
IP69K, suitable for high pressure, high temperature, wash down
Key release lids available for unlocking the locking mechanism in emergencies

Note

Actuator is not supplied and must be ordered separately.

Standards

Conforms to EN 1088 & EN 60947-5-1.

//media.rs-online.com/t_line/L351399-01.gif
//media.rs-online.com/t_line/L357917-01.gif

Incorporates a power-to-unlock function
Specially designed to eliminate the problems of lockout when interfacing solenoid locking switches into dual channel safety relays

Note

This safety device can be used with Guardlink, a new safety linking technology from Allen Bradley Guardmaster.
Guardlink simplifies and reduces the connection time of the safety system, whilst providing real-time diagnostic information over Ethernet IP. This makes it simple to identify the location of the device that has tripped the safety system, thus reducing downtime, and improving the machines overall efficiency. For more details, please go to the Guardlink brochure.

Warning

  • With the TLS-2 GD2 “power to lock” style, provisions may be required to ensure that a dangerous situation can not result from open circuit faults or power cuts.
Specificaties
Kenmerk Waarde
Range TLS-3-GD2
Series 440G-T
Power to Lock / Unlock Power to Unlock
Conduit Entry M20
Length 126mm
Width 86mm
Depth 33mm
Supply Voltage 24 V ac/dc
IP Rating IP66, IP67, IP69K
Housing Material Plastic
Safety Contacts 2NC
Auxiliary Contacts NO
Dimensions 39 x 86 x 126 mm
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
40 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
236,00
(excl. BTW)
285,56
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 236,00
Related Products
From DBK enclosures, this range of conduction/convection PTC ...
Description:
From DBK enclosures, this range of conduction/convection PTC heating elements are 'Self regulating' and housed in a compact flat alloy construction, allowing perfect heat transmission to the thermal medium. This means that no thermal cut-out or thermostat is required. These ...
The LinkSwitch-II dramatically simplifies low power CV/CC charger ...
Description:
The LinkSwitch-II dramatically simplifies low power CV/CC charger designs by eliminating an optocoupler and secondary control circuitry. The device introduces a revolutionary control technique to provide very tight output voltage and current regulation, compensating for transformer and internal parameter ...
50 W primary switch AC/DC plug-in power supplies ...
Description:
50 W primary switch AC/DC plug-in power supplies in 100 x 160 mm European formatSteel panel coverUniversal input 93 → 264 Vac without switchingSafety complies with VDE 0805, IEC 950 and EN 60 950Noise compliant in accordance with VDE 0871, ...
The TDK Lambda RFE1600 Series is a 1600W ...
Description:
The TDK Lambda RFE1600 Series is a 1600W single output AC-DC power supply in a low profile package for stand alone or distributed power architectures (DPA). The output voltage is user adjustable enabling the RFE1600 to be used in a ...