Keithley 2400 Series Source Meter, ±200 mV → ±60 V, 1-Channel, ±10 μA → ±3 A, 60 W Output

The Keithley 2400 series 60W sourcemeter is 1-channel lab equipment. The output voltage rating ranges between ±200mV and ±60V and the output current rating is ±10μA and ±3A. It offers a low cost, tightly integrated sourcing and measurement along with a wide, dynamic range. This makes the series 2400 model well suited for benchtop and system applications with low voltage requirements and with limited test hardware budgets.
Note:
All SourceMeter instruments provide 4-quadrant operation. In the 1st and 3rd quadrants, they operate as a source, delivering power to a load. In the 2nd and 4th quadrants, they operate as a sink - dissipating power internally. The voltage, current, and resistance can be measured during source or sink operation.
Inclusions:
Test leads and (downloadable) LabVIEW software driver, LabTracer software, TestPoint software driver.
Note:
The applications include resistive devices

0.012% basic measure accuracy with 6-1/2 digit resolution
1700 readings/ second at 4-1/2 digits via GPIB
2-, 4-, and 6-wire remote V-source and measure sensing
5 instruments in 1 (IV source, IVR measure)
7 models 20–100WDC,1000W pulsed, 1100V to 1μV,10A to 10pA
Available high speed sense lead contact check function
Keithley LabTracer 2.0 I-V curve tracing application software (download)
Pass/ fail comparator for fast sorting/ binning
Programmable DIO port for automation/handler/prober control
Source and sink (4-quadrant) operation
Standard SCPI GPIB, RS-232 and Keithley trigger link interfaces

Airbags
Circuit protection devices: TVS, MOV, fuses, etc
Connectors, switches, relays
Discrete semiconductor devices
High brightness LEDs (DC and pulse)
ICs, RFICs, MMICs
Laser diodes, laser diode modules, LEDs, photodetectors
Passive devices
Transient suppression devices
LIV
Characterising low-leakage electronic device/circuits
Active/passive component test

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007