Radial spherical plain bearing 30mm id 5

  • RS-stocknr. 191-3878
  • Fabrikantnummer GE30-PB
  • Fabrikant INA
Wetgeving en compliance

Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required

Kenmerk Waarde
Bore Size 30mm
Outside Diameter 55mm
Static Radial Load Rating 159000N
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 120,57
5 - 9
€ 115,75
10 - 24
€ 113,34
25 +
€ 110,92