Freewheel/Bearing CSK-P 20mm

  • RS-stocknr. 146-5252
  • Fabrikantnummer CSK 20-P
  • Fabrikant Stieber
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Type CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals is recommended especially when the working temperature exceeds 50°C. Oil bath lubrication is also possible. All the CSK versions are equipped with “formchromed” sprags.

Specificaties
Kenmerk Waarde
Series 62
Inside Diameter 20mm
Outside Diameter 47mm
Race Width 14mm
Torque 50Nm
Over-running Speed 6000rpm
Dynamic Load Rating 9.4kN
Static Load Rating 4.46kN
Keyway Inner and Outer Race
Drag Torque 1.3Ncm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
95,87
(excl. BTW)
116,00
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 95,87
5 +
€ 92,04
Related Products
INA from Schaeffler radial insert ball bearings with ...
Description:
INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical ...
INA from Schaeffler angular contact ball bearings have ...
Description:
INA from Schaeffler angular contact ball bearings have a double row design and lip seals on both sides. • Lower operating costs • Reduced maintenance due to improved lubrication • Lower heat generation • Less noise • Sealed.
INA from Schaeffler linear ball bearings KH and ...
Description:
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which ...
INA from Schaeffler combined needle roller bearings comprise ...
Description:
INA from Schaeffler combined needle roller bearings comprise of a needle roller bearing and a rolling bearing component capable of supporting axial loads. The NKIB needle roller/angular contact ball bearings have an inner ring. • Optimised raceway surfaces • Higher ...