Freewheel Built-In ASNU 30mm

  • RS-stocknr. 146-5268
  • Fabrikantnummer ASNU 30
  • Fabrikant Stieber
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. A typical arrangement is to install this type alongside a bearing within the same location tolerances. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.

Specificaties
Kenmerk Waarde
Series 63
Inside Diameter 30mm
Outside Diameter 72mm
Race Width 27mm
Torque 255Nm
Over-running Speed 1400 (Inner) rpm, 2200 (Outer) rpm
Keyway Inner and Outer Race
Drag Torque 14Ncm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
252,50
(excl. BTW)
305,52
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 252,50
5 +
€ 242,40
Related Products
INA from Schaeffler drawn cup roller clutches are ...
Description:
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in ...
Type CSK is a sprag type freewheel integrated ...
Description:
Type CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” ...
Types CSK..P and CSK..PP are sprag type freewheels ...
Description:
Types CSK..P and CSK..PP are sprag type freewheels integrated into 62.. series ball bearings (except size 40). They are bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals ...
Type CSK is a sprag type freewheel integrated ...
Description:
Type CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” ...