RS PRO 2.54mm Pitch Spring Test Probe With Serrated Tip, 3A

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

RS Pro Spring Probe with Crosscut Head

Brought to you under the trusted RS Pro Brand, this crosscut headed spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.

The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.

The crosscut head is ideal for test lands, pads and leads. The sharp points penetrate and provide excellent electrical contact.

An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)

Features and Benefits

• Contact Resistance of 50mΩ
• Current Rating of 3A
• Gold Plated
• Spring Pressure of 1.47 N(g)

Specificaties
Kenmerk Waarde
Pitch 2.54mm
Length 24.7mm
Body Material Phosphor Bronze
Current Rating 3A
Contact Resistance 30mΩ
Probe Tip Type Serrated
400 op voorraad - levertijd is 1 werkdag(en)
Prijs Each (In a Pack of 5)
3,778
(excl. BTW)
4,571
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 3,778
€ 18,89
25 - 45
€ 3,498
€ 17,49
50 - 95
€ 3,21
€ 16,05
100 +
€ 2,924
€ 14,62
*prijsindicatie
Related Products
Being CAT IV rated means these probes can ...
Description:
Being CAT IV rated means these probes can be used for measurements at the supply source in installation, such as the secondary side of medium voltage switchgear, electricity meters and even for employees of power distribution companies overhead lines. Voltage ...
Micro probe that accepts 0.64mm socket (Stock No. ...
Description:
Micro probe that accepts 0.64mm socket (Stock No. 775-754 for adaptor leads)Tip is spring loaded and suitable for sampling extremely small measuring points and SMD components.
Rigid, short reach probe that accepts 4mm plugs. ...
Description:
Rigid, short reach probe that accepts 4mm plugs. The tip includes a 4mm Multilam® plug to mate with any 4mm socket. Handle guard is chamfered on one side for close side-by-side plugging of the probesHandle includes a non slip fluted ...
A range of accessories for use with OM ...
Description:
A range of accessories for use with OM 16 micro-ohmmeter. Mounted on metallic rod with handle5 m cord and locking socket adapted to the OM 16 micro-ohmmeterMeasurement is taken by pressing a point (voltage reading) mounted on a spring. This ...