2 Way Fused Terminal Block, 20A 690 V, Screw Down, Nylon

  • RS-stocknr. 741-8622
  • Fabrikantnummer CMFTB/2
  • Fabrikant CAMDENBOSS
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

6.3x25mm Fused Terminal Blocks

Accepts 5x20mm& 6.3x25mm (1”x1/4”) fuses
Conforms to IEC257
Anti rotation spigot
IP20 finger protection
Cable entry 10mm sq (3x1.5mm sq or 2x2.5mm sq)
Supplied complete with earth screw and washer

Specificaties
Kenmerk Waarde
Number of Ways 2
Fused Yes
Mounting Type Screw
Pitch 16mm
Current Rating 20A
Termination Method Screw Down
Cable CSA 2.5mm²
Wire Size 4 mm²
Voltage Rating 690 V
Minimum Operating Temperature -20°C
Material Nylon
Maximum Operating Temperature +125°C
44 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Bag of 10
10,28
(excl. BTW)
12,44
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 49
€ 10,28
€ 1,028
50 - 99
€ 9,77
€ 0,977
100 +
€ 9,25
€ 0,925
*prijsindicatie
Related Products
Socket connector screw terminals use a leaf-spring wire ...
Description:
Socket connector screw terminals use a leaf-spring wire connection system to prevent the clamping screw digging into the cable and damaging individual strands. • Rated at 8 A / 250 V ac• Wire size 0.5 – 1.5 mm²• Female plugs ...
Terminal blocks moulded in high grade melamine. Each ...
Description:
Terminal blocks moulded in high grade melamine. Each termination consists of a nickel plated brass yoke, two zinc plated steel screws and two stainless steel leaf springs. The leaf springs protect conductors when the screw termination is tightened. • Multi-pin ...
Left hand terminal block plug connectors with a ...
Description:
Left hand terminal block plug connectors with a 3.5mm pitch and side wire entry that mate with 3.5mm unshrouded terminal block headers (see stock number 782-5392 typically). These 3.5mm left hand terminal block plug connectors are end to end stackable ...
LM Series screw clamp terminals extend cost saving ...
Description:
LM Series screw clamp terminals extend cost saving and space saving requirements on printed circuit boards. The terminals feature a proven clamping yoke connection. • Small and compact in size• Faster speed of assembly• Accepts up to 1.5 mm² (28-16 ...