Ripac VARIO Rack Mount Chassis, 6U, 84hp, 245mm Depth

  • RS-stocknr. 187-065
  • Fabrikantnummer 3684.156
  • Fabrikant Rittal
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Ripac EMC Sub-Rack Kit

A version of the Ripac Vario sub-rack equipped for EMC with gaskets and covers. Requires EMC panels front and rear to complete the Faraday Cage. Kit consists of:

Side Plates: 2.5mm Aluminium, Clear Chromated
Front and Rear horizontal Rails: Aluminium, Clear Chromated
Flanges: Aluminium, Clear Chromated
Threaded inserts
Rear trims
Covers: Aluminium, unplated
Horizontal and Vertical EMC gaskets
Assembly screws

Caution

Ripac Vario EMC sub-racks are designed to enable systems to comply with 89/336EC, for which, the complete system will need to be tested in operational mode.

Standards

IEC 60 297-3 to 5.

Approvals

IEC 600-68-2-6 test Fc, IEC 600-68-2-27 test Ea

//media.rs-online.com/t_line/L0186848-01.gif

Ripac Vario and EMC Sub-Racks

A universal, flexible, sub-rack range, capable of EMC upgrade, for mounting Euroboards and double Euroboards and plug-in modules, in 482.6mm (19”) racks.

Specificaties
Kenmerk Waarde
Rack Units 6U
Series Ripac VARIO
Horizontal Pitch 84HP
Depth 245mm
Colour Natural
Material Aluminium
Dimensions 262.75 x 482.6 x 245mm
Height 262.75mm
Width 482.6mm
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
Easy handling and tool-free assemblyQuick-release fastener including security ...
Description:
Easy handling and tool-free assemblyQuick-release fastener including security lock 3524 EInternal latch included (cannot be opened with a key)Lock with chassis, cable clamp rail may be top-mounted on the outer mounting levelSuitable for IT climate control and rack extinguishingSheet steel ...
Robust and ergonomic light grey (RAL 7035) rack ...
Description:
Robust and ergonomic light grey (RAL 7035) rack cases fitted with front bezelTwo side extrusions, top, base and extruded rear panel (all ALOCROM 1200), comfort handlesEMC shielded, Base panel fitted with M4 earth studIntegral PCB and chassis guidesSupplied fully assembled ...
Description:
• To slot into the 19 in slide mounts• Static load-carrying capacity 15 kg per pair• Support for heavy 19 in chassis• 1.5 mm steel with aluminium zinc finish• RoHS compliant.
Complete slide-in unit made from Al/Zn-coated sheet steel ...
Description:
Complete slide-in unit made from Al/Zn-coated sheet steel with aluminium profile front panelInstallations are attached straight to the base plateRear wall can be removed for easy processingFront panel easy to process mechanicallyCover plate closed.