Dehn 23 V ac, 33 V dc 20kA DCO Type 2 Arrester, DIN Rail Mounting

  • RS-stocknr. 786-9389
  • Fabrikantnummer DCO SD2 ME 24
  • Fabrikant Dehn
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Dehn Slim Terminal Block Surge Arresters

Energy coordinated two-stage arrester with disconnection function for protecting two single lines sharing a common reference potential as well as unbalanced interfaces

Space-saving terminal block with integrated surge protection
Disconnection module for isolating signal circuits for maintenance work
For installation in conformity with the lightning protection zones concept at the boundaries from 0B –2 and higher

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specificaties
Kenmerk Waarde
Suppressor Type Type 2 Arrester
Maximum Voltage Rating 23 V ac, 33 V dc
Mounting Type DIN Rail
Maximum Surge Current 20kA
Series DCO
Length 6mm
Depth 87.5mm
Height 94.5mm
Dimensions 6 x 87.5 x 94.5mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +80°C
17 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
67,80
(excl. BTW)
82,04
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 67,80
10 - 19
€ 61,11
20 - 24
€ 55,00
25 - 49
€ 49,49
50 +
€ 44,54
Related Products
STP T12 25 is the series of combined ...
Description:
STP T12 25 is the series of combined Type 1+2/Class I+II devices for discharging lightning currents and protecting against voltage surges. Suitable as the first step of protection in incoming power supply panels and areas with exposure to the atmosphere, ...
MA15 series surge protection devices protect electronic equipment ...
Description:
MA15 series surge protection devices protect electronic equipment and computer networks against ""noise pollution"".MA15 units clean the effects of industrial noise and surges that may be caused by lightning, switching devices and power factor correction circuits. Suitable for AC or ...
PLUGTRAB PT-IQ intelligent and systematic surge protection system ...
Description:
PLUGTRAB PT-IQ intelligent and systematic surge protection system for measurement and control (MCR) technology. It is the first solution to offer direct early detection of damaged surge protective devices using a three-stage status display to indicate the state of the ...
Type 1 and 2 prewired spark gap based ...
Description:
Type 1 and 2 prewired spark gap based combined lightning current and surge arresters consisting of a base and plug in modules. Maximum system availability and reliability due to the RADAX Flow follow current limitationNo tripping of 20amp gL/gG fuses ...