Eurotherm USB Cable, 2m

  • RS-stocknr. 790-3600
  • Fabrikantnummer ITOOLS/NONE/USB/
  • Fabrikant Eurotherm
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

iTool - CPI USB Clip

CPI USB Clip from Eurotherm provides a convenient and low cost instrumentation backup and configuration solution. Use Eurotherm’s free to download iTools software to maintain secure backups of valuable instrument configurations, or to change operating and commissioning settings.

Use with Eurotherm nanodac, piccolo and Series 3000 controllers
Convenient and quick to connect
Powers the instrument directly from the USB connection, without needing a separate mains supply
Does not require the instrument to be fitted into a sleeve to backup or restore configurations

Note

Please note that software is required to run & setup. This can be downloaded from the link within the data sheet, listed under "Technical Reference" on the product page

Eurotherm - Accessories

Specificaties
Kenmerk Waarde
Cable Type USB Cable
Cable Length 2m
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
28 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
95,21
(excl. BTW)
115,20
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 95,21
Related Products
Designed for applications that have traditionally fallen between ...
Description:
Designed for applications that have traditionally fallen between safety relays and safety PLCs, the SmartGuard 600 is a general purpose programmable safety controller for safety applications that require some complex logic - allowing for more advanced safety functionality. It features ...
Pepperl + Fuchs SC-System signal conditioners are especially ...
Description:
Pepperl + Fuchs SC-System signal conditioners are especially designed for general purpose applications and ensure reliable process communication. High-quality isolation, an extended temperature range, and an extremely compact housing design characterise the signal conditioner range. The SC-System offers powerful ...
ON/OFF and PID control methodsOperating Temperature Range: -10°C ...
Description:
ON/OFF and PID control methodsOperating Temperature Range: -10°C to +55°C0-50mV linear inputIP66/NEMA4 front fasciaCE marked in compliance to relevant European Directives.
Withstand voltage 2000V coil to contactArc barriers to ...
Description:
Withstand voltage 2000V coil to contactArc barriers to prevent flash-over between adjacent polesRelay clips for DIN types available separatelyContact resistance: 50mΩIsolation coil to contact: 12kVOperating temperature range: -25 to +55°CSwitching Voltage: 110Vac; 24VdcContact material: AgCdODimensions: H42.4mm x ...