Microchip MCP9701AT-E/LT, Voltage Temperature Sensor -10 → +125 °C ±1°C Analogue, 5-Pin SC-70

  • RS-stocknr. 738-7054
  • Fabrikantnummer MCP9701AT-E/LT
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TH
Productomschrijving

MCP9700/9701 Thermistor ICs

The MCP9700/9701 series of thermistor ICs convert temperature to analogue voltage. A key advantage of this series of thermistor IC is it's resistance to parasitic capacitance and the ability to drive large capacitive loads.
Applications include temperature monitoring, office equipment, home appliances, entertainment systems, hard disk drives, battery packs and any application that needs to measure a relative change in temperature.

Temperature & Humidity Sensors, Microchip

Specificaties
Kenmerk Waarde
Sensor Function Temperature
Output Type Voltage
Interface Type Analogue
Accuracy ±1°C
Mounting Type Surface Mount
Pin Count 5
Operating Temperature Range -10 → +125 °C
Minimum Operating Temperature -10 °C
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 3.1 V
Maximum Operating Supply Voltage 5.5 V
Package Type SC-70
Length 2.2mm
Height 1mm
Width 1.35mm
Sensor Gain 19.5mV/°C
Dimensions 2.2 x 1.35 x 1mm
110 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
100 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,246
(excl. BTW)
0,298
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 20
€ 0,246
€ 2,46
30 - 90
€ 0,235
€ 2,35
100 +
€ 0,211
€ 2,11
*prijsindicatie
Verpakkingsopties
Related Products
The GF708 magnetic field sensors from Sensitec are ...
Description:
The GF708 magnetic field sensors from Sensitec are based on the GMR (Giant MagnetoResistive) effect. They feature a Wheatstone bridge with on-chip flux concentrators, providing an improvement in sensitivity. The GF708 sensor can be used for highly sensitive applications with ...
The TMP35/36/37 series of temperature sensors generate a ...
Description:
The TMP35/36/37 series of temperature sensors generate a voltage output that is linearly proportional to that of the centigrade temperature and can easily interface with temperature control circuits and ADCs.Applications include thermal protection & management, environmental control, industrial process control, ...
The MAX31865 is an easy-to-use resistance-to-digital converter optimized ...
Description:
The MAX31865 is an easy-to-use resistance-to-digital converter optimized for platinum resistance temperature detectors (RTDs). An external resistor sets the sensitivity for the RTD being used and a precision delta-sigma ADC converts the ratio of the RTD resistance to the reference ...
The MCP9600 is a fully integrated thermocouple Electromotive ...
Description:
The MCP9600 is a fully integrated thermocouple Electromotive Force (EMF) to degree Celsius converter, with integrated Cold-Junction compensation. The MCP9600 supports 8 thermocouple types (K, J, T, N, S, E, B and R). The MCP9600 provides user-programmable registers, adding design ...