Microchip MCP9700AT-E/TT, Voltage Temperature Sensor -40 → +125 °C ±2°C Analogue, 3-Pin SOT-23

  • RS-stocknr. 889-5459
  • Fabrikantnummer MCP9700AT-E/TT
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TH
Productomschrijving

MCP9700/9701 Thermistor ICs

The MCP9700/9701 series of thermistor ICs convert temperature to analogue voltage. A key advantage of this series of thermistor IC is it's resistance to parasitic capacitance and the ability to drive large capacitive loads.
Applications include temperature monitoring, office equipment, home appliances, entertainment systems, hard disk drives, battery packs and any application that needs to measure a relative change in temperature.

Temperature & Humidity Sensors, Microchip

Specificaties
Kenmerk Waarde
Sensor Function Temperature
Output Type Voltage
Interface Type Analogue
Accuracy ±2°C
Mounting Type Surface Mount
Pin Count 3
Operating Temperature Range -40 → +125 °C
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 2.3 V
Maximum Operating Supply Voltage 5.5 V
Package Type SOT-23
Length 3.05mm
Height 1.02mm
Width 1.4mm
Resolution 8 bit
Dimensions 3.05 x 1.4 x 1.02mm
Sensor Gain 10mV/°C
6000 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (On a Reel of 3000)
0,22
(excl. BTW)
0,27
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 +
€ 0,22
€ 660,00
*prijsindicatie
Related Products
VEML6040 color sensor senses red, green, blue, and ...
Description:
VEML6040 color sensor senses red, green, blue, and white light and incorporates photodiodes, amplifiers, and analog / digital circuits into a single chip using CMOS process. With the color sensor applied, the brightness, and color temperature of backlight can be ...
The Allegro Microsystems A1220, A1221, A1222, and A1223 ...
Description:
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.A south pole ...
The GF708 magnetic field sensors from Sensitec are ...
Description:
The GF708 magnetic field sensors from Sensitec are based on the GMR (Giant MagnetoResistive) effect. They feature a Wheatstone bridge with on-chip flux concentrators, providing an improvement in sensitivity. The GF708 sensor can be used for highly sensitive applications with ...
Description:
The TC642 is a switch mode fan speed controller for use with brushless DC motors. Temperature proportional speed control is accomplished using pulse width modulation. A thermistor (or other voltage output temperature sensor) connected to the VIN input furnishes the ...