Vishay NTC NTC Thermistor 10kΩ

  • RS-stocknr. 170-8666
  • Fabrikantnummer NTCAIMME3C90373
  • Fabrikant Vishay
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Vishay NTCAIMME3 Series Radial Thermistors

Vishay NTCAIMME3 series miniature immersion sensor offer fast response time
Reduced thermal gradient due to the use of small tip dimensions and thin insulated wire
Sensor for permanent contact with water or liquids

NTCAIMME3 series applications include temperature measurement, sensing and control and temperature compensation in industrial and consumer electronics

tijdelijk niet op voorraad – nieuwe voorraad verwacht op 21-02-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Bag of 250)
0,812
(excl. BTW)
0,983
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
250 - 250
€ 0,812
€ 203,00
500 +
€ 0,738
€ 184,50
*prijsindicatie
Related Products
The 914MCE series from Honeywell are miniature limit ...
Description:
The 914MCE series from Honeywell are miniature limit switches. They are part of the range from Honeywell that are a smaller, lower cost solution. 914MCE limit switches have a standard 20 mm mounting footprint that adheres to most global mounting ...
A range of general purpose basic limit switches. ...
Description:
A range of general purpose basic limit switches. They incorporate a small permanent magnet in the contact mechanism to deflect the arc to effectively extinguish it. This range is the same shape and moutning procedures as the Z basic switches. ...
Combined opening sensor (reed contact) for flush/surface mounting ...
Description:
Combined opening sensor (reed contact) for flush/surface mounting with NC or NO contactSuitable for private and commercial buildings with large switching distancesSuitable for all applications The contacts are suitable for both parallel and overhead mounting (magnet/contact).
These Reed proximity switches operate when in the ...
Description:
These Reed proximity switches operate when in the presence of magnetically conductive material. Instead of an actuating magnet, only a simple piece of iron is required to operate the sensor from the front or above. Applications include industrial, end travelling ...