RS PRO Thermistor 10Ω, 10 (Dia.) x 5mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS Pro Inrush Current Suppressors

A range of PCB mounting metal oxide ceramic inrush current suppressors which when cold at initial switch on, present a high series resistance and limit current flow
As the devices warm the resistance progressively reduces to allow normal current to flow
The device quickly cools and returns to high resistance when the power is switched off
Suitable for switched mode power supplies, small electric motors, filament lamps, transformers etc

Caution

These suppressors are designed to run at elevated temperatures and need to be hot to achieve low continuous operating resistance. It is therefore important to allow for this when installing them in the circuitry.

//media.rs-online.com/t_line/L210667-01.gif
Specificaties
Kenmerk Waarde
Temperature Coefficient Type NTC
Thermal Time Constant 56s
Resistance @ 25 °C 10 Ω
Tolerance ±20%
Application Protection
Depth 5mm
Dimensions 10 (Dia.) x 5mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +170°C
189 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
243 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
1,51
(excl. BTW)
1,83
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 1,51
25 - 99
€ 1,31
100 - 249
€ 1,09
250 - 499
€ 0,93
500 +
€ 0,85
Related Products
The HIH-4602-A/C series relative humidity sensors combine both ...
Description:
The HIH-4602-A/C series relative humidity sensors combine both relative humidity and temperature sensing in a TO-5 housing with a hydrophobic sintered stainless steel filter.,The laser-trimmed, thermoset polymer capacitive sensing elements have on-chip signal conditioning. Near linear voltage output vs % ...
NTC Thermistors, SMD 0402, 0603, 0805, 1206 Chip. ...
Description:
NTC Thermistors, SMD 0402, 0603, 0805, 1206 Chip. FEATURESExtended resistance values available in standard sizesWraparound Ni barrier terminations with 100 % SnAllows design flexibility for use with hybrid circuitryAPPLICATIONSBattery chargersPower suppliersOffice equipment.
These thermistors have a negative temperature coefficient. The ...
Description:
These thermistors have a negative temperature coefficient. The part consists of a NTC chip, soldered between two tin plated copper wires. It has a gray base coating and is color band coded. The coating has no specified insulation properties. • ...
Coated chip with epoxy AWG30 insulated leadsSilver plated ...
Description:
Coated chip with epoxy AWG30 insulated leadsSilver plated nickel leadsHigh precision resistanceOutstanding ability to reproduce the sensibility index BSmall size and rapid response timeIdeal for temperature measurement applications.