Loctite 290 Green Thread lock, 10 ml, 3 h Cure Time

  • RS-stocknr. 496-158
  • Fabrikantnummer 267397
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Loctite® 290 Penetrating

Medium strength for locking and sealing of threaded fasteners and close-fitting parts after assembly
Penetrates tightened threads, porous materials and cracks by capillary action

Note

Testing should be carried out prior to contact with styrene, acrylic and polycarbonate based plastics to ensure compatibility.

Loctite Thread lock

The Loctite 10ml thread lock is designed for locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need to disassemble before application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. This product can also fill porosity in welds, castings and powdered metal parts.
Note:
Testing should be carried out before contact with styrene, acrylic and polycarbonate-based plastics to ensure compatibility.

Features and Benefits

• Medium strength for locking and sealing of threaded fasteners and close-fitting parts after assembly
• Penetrates tightened threads, porous materials and cracks by capillary action
• Cure time is 24 hours
• Low viscosity of 20 → 55mPa/s
• Chemical composition of dimethacrylate Ester
• Specific gravity of 1.08
• Operating temperature ranges between-55°C and 150°C

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Threadlocking and Retainers

Specificaties
Kenmerk Waarde
Trade Name Loctite 290
Application Threadlocking
Material Compatibility Metal
Threadlocking Strength Medium High
Cure Time 24 h
Anaerobic Yes
Colour Green
Product Form Liquid
Package Type Bottle
Package Size 10 ml
Maximum Operating Temperature +150°C
Minimum Operating Temperature -55°C
Specific Gravity 1.08
Odour Characteristic
Viscosity Measurement 20 → 55mPa/s
Special Features Anaerobic
Operating Temperature Range -55 → +150 °C
Viscosity Description Low Viscosity
Chemical Composition Dimethacrylate Ester
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
190 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
12,19
(excl. BTW)
14,75
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 12,19
6 - 14
€ 11,70
15 +
€ 11,45
Related Products
Medium strength oil tolerant torque tension gradeGeneral purpose ...
Description:
Medium strength oil tolerant torque tension gradeGeneral purpose threadlockingParticularly suitable for less active surfaces e.g. stainless steelPrevents loosening through vibration and leakage of threaded fasteners.
The CRC 60ml Bloc'ront thread locker is an ...
Description:
The CRC 60ml Bloc'ront thread locker is an opaque varnish, which after drying forms an insulating, translucent for screw locking. It is available in red colour. Opaque red liquid varnish that forms an insulating, translucent film when dry for locking ...
The Jelt 50ml Varybond Grade 12-43 is a ...
Description:
The Jelt 50ml Varybond Grade 12-43 is a medium-strength universal adhesive with excellent resistance against chemicals and temperature. It cures very fast, even on galvanized surfaces and on stainless steel or high-alloyed steel.Note:This product works best on clean, dry and ...
Universal adhesive for assembling easy-to-remove screws, with the ...
Description:
Universal adhesive for assembling easy-to-remove screws, with the screwing depth exceeding twice the diameter of the screw.Recommended for adjusting set screws and locking fine-pitch screws.