Go No-Go Plug Gauge M20

  • RS-stocknr. 177-0517
  • Fabrikantnummer 16030
  • Fabrikant Volkel
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Volkel Go No-Go Plug Gauge

The Volkel Go No-Go plug gauge M20x2.5 is a combination of GO and NO-GO plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread scanners. This gauge must screw into the part by hand more than two threads. If unable to do so, the thread does not meet the requested standards. This is calibrated at the measurement laboratory using IAC thread scanners. The reference temperature for parts and gauge is 20°C. It is made from high-quality raw material. This gauge is mostly used as an inspection tool.

Features and Benefits

• Metric measurement system
• 6H tolerance
• High durability and reliability
• Compact size and rugged
• Easy to use
• Accurate
• Double ended gauge

Certifications

• ISO1502
• DIN13/DIN2240

Certifications

• ISO1502
• DIN13/DIN2240

Specificaties
Kenmerk Waarde
Plug/Ring Plug
Gauge Type Go/No Go
Thread Size M20 x 2.5
Tolerance 6H
Single or Double Ended Double
Imperial or Metric Metric
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
95,10
(excl. BTW)
115,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 95,10
Kalibratie-opties
Related Products
A range of plug gauges for inspecting and ...
Description:
A range of plug gauges for inspecting and gauging the crimping chambers on a variety of hand crimping tools/dies.Stock numbers 876-2359, 876-2383 and 876-2365 are plug gauges for use with TE part numbers 49935, 169409, 525693 and 574573Stock number 876-2361 ...
A thread limit plug gauge is a combination ...
Description:
A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring.The go end of the thread plug gauge must screw into ...
The Volkel No-Go ring gauge M12x1.75 is calibrated ...
Description:
The Volkel No-Go ring gauge M12x1.75 is calibrated at a measurement laboratory using IAC thread scanners. This No-Go thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference ...
The Volkel No-Go ring gauge M8x1.25 is calibrated ...
Description:
The Volkel No-Go ring gauge M8x1.25 is calibrated at measurement laboratory using the IAC thread scanners. This No-Go thread gauge is marked in red. This thread No-Go ring gauge must not screw into the part by hand by more than ...