RSCAL(1770525)GO NO-GO PLUG GAUGE M8

  • RS-stocknr. 189-3336
  • Fabrikantnummer 16021 +Cal
  • Fabrikant Volkel
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring. The go end of the thread plug gauge must screw into the thread cut into a part by hand (without using excessive force). If unable to do so, the thread does not meet the requested standards (=scrap). The scrap side of the thread plug gauge must not be able to be manually turned more than two turns into the cut thread (without using excessive force). If it can be screwed in more, the thread does not meet the requested standards (=scrap). The reference temperature for parts and gauges is 20° Celsius. Calibrated at a measurement laboratory separate from VÖLKEL. Calibrated using IAC thread scanners.

Specificaties
Kenmerk Waarde
Plug/Ring Plug
Gauge Type Go/No Go
Thread Size M8 x 1.25
Pitch Diameter 1.25mm
Tolerance 6H
Single or Double Ended Double
Imperial or Metric Metric
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 11-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
95,00
(excl. BTW)
114,95
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 95,00