RS PRO 1 kΩ Carbon Film Resistor 0.5 W 5 %
- RS-stocknr.:
- 707-8221
- Artikelnummer Distrelec:
- 304-17-697
- Fabrikant:
- RS PRO
Bulkkorting beschikbaar
Subtotaal (1 verpakking van 10 eenheden)*
€ 1,69
(excl. BTW)
€ 2,04
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 410 stuk(s) vanaf 13 april 2026
- Plus verzending 19.310 stuk(s) vanaf 13 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 10 - 240 | € 0,169 | € 1,69 |
| 250 - 490 | € 0,152 | € 1,52 |
| 500 - 990 | € 0,141 | € 1,41 |
| 1000 - 2490 | € 0,132 | € 1,32 |
| 2500 + | € 0,119 | € 1,19 |
*prijsindicatie
- RS-stocknr.:
- 707-8221
- Artikelnummer Distrelec:
- 304-17-697
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Resistor | |
| Resistance | 1kΩ | |
| Resistor Type | Carbon | |
| Power Rating | 0.5W | |
| Tolerance ± | 5% | |
| Packaging | Ammo Pack | |
| Axial/Radial | Axial | |
| Voltage | 300V | |
| Technology | Carbon Film | |
| Series | RS | |
| Automotive Standard | No | |
| Package/Case | 0623 | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 155°C | |
| Diameter | 2.3mm | |
| Length | 6.3mm | |
| Standards/Approvals | IEC 115 and IEC 115-2 | |
| Temperature Coefficient | +350 ppm/°C | |
| Lead Diameter | 0.55mm | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Resistor | ||
Resistance 1kΩ | ||
Resistor Type Carbon | ||
Power Rating 0.5W | ||
Tolerance ± 5% | ||
Packaging Ammo Pack | ||
Axial/Radial Axial | ||
Voltage 300V | ||
Technology Carbon Film | ||
Series RS | ||
Automotive Standard No | ||
Package/Case 0623 | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 155°C | ||
Diameter 2.3mm | ||
Length 6.3mm | ||
Standards/Approvals IEC 115 and IEC 115-2 | ||
Temperature Coefficient +350 ppm/°C | ||
Lead Diameter 0.55mm | ||
- Land van herkomst:
- TW
RS PRO 1 kΩ Carbon Film Resistor 0.5W ±5%
Need to control the flow of an electrical current through a circuit? Use this resistor from RS PRO. It's made of non-inductive carbon film coated in a ceramic substrate. This makes it a good insulator against electricity and heat.
The unit's solder-plated copper leads fit into through-holes on your device, so it's easy to install. For protection against impact and deterioration, the carbon film is overlaid with an epoxy resin.
This resistor has a high level of resistance stability as it meets the requirements of International Electrotechnical Commission (IEC) 115 and IEC 115-2. Carbon film resistors like this one are often used to regulate current in devices such as capacitors, digital logic circuits and transistors.
Features and Benefits
Gerelateerde Links
- RS PRO 16 kΩ Carbon Film Resistor 0.5 W 5 %
- RS PRO 100 kΩ Carbon Film Resistor 0.5 W 5 %
- RS PRO 8.2 kΩ Carbon Film Resistor 0.5 W 5 %
- RS PRO 5.1 kΩ Carbon Film Resistor 0.5 W 5 %
- RS PRO 15 kΩ Carbon Film Resistor 0.5 W 5 %
- RS PRO 4.7 kΩ Carbon Film Resistor 0.5 W 5 %
- RS PRO 1.5 kΩ Carbon Film Resistor 0.5 W 5 %
- RS PRO 1.8 kΩ Carbon Film Resistor 0.5 W 5 %