RS PRO Double Pole Double Throw (DPDT) Toggle Switch, Latching, PCB

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Toggle Switches, Sub-Miniature - RS Series

RS series of sub-miniature toggle switches with a low contact resistance and are available with either Silver (Q) or Gold (R) contact material. The RS series sub-miniature toggle switches have a minimum insulation resistance of 1000MΩ 500V and a minimum dielectric strength of 1000 Vrms at sea level.

Specificaties
Kenmerk Waarde
Contact Configuration DPDT
Switch Operation Latching
Contact Current Rating 3 A @ 120 V ac
Mounting Type PCB
Terminal Type Through Hole
Panel Cut Out Diameter 4.95mm
Actuator Length 7.37mm
Actuator Material Chromium Plated Brass
Contact Resistance 20mΩ
Mechanical Life 30000Cycles
Maximum Operating Temperature +85°C
Standards Met RoHS & Lead Free
Contact Material Silver Plated Brass
Minimum Operating Temperature -30°C
Panel Cut Out Size 4.95mm
Operating Temperature Range -30 +85°C
95 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2,24
(excl. BTW)
2,71
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2,24
Verpakkingsopties
Related Products
Epoxy sealed terminals prevent contamination during solderingChrome Plated ...
Description:
Epoxy sealed terminals prevent contamination during solderingChrome Plated Brass actuatorDiallyl Phthalate (DAP) case (UL94V-0)Silver contacts.
Switches suitable for PCB mounting with pins arranged ...
Description:
Switches suitable for PCB mounting with pins arranged on a 0.1 in pitch gridRight angle versions have two additional support pinsIdeal where either panel space or board size is at a premiumSuitable for low level switching applicationsTerminals epoxy sealed against ...
Break before make contact timingEpoxy sealed terminalsStainless steel ...
Description:
Break before make contact timingEpoxy sealed terminalsStainless steel frame with brass tin plated solder support.
IP67 rated RS series of PCB mount miniature ...
Description:
IP67 rated RS series of PCB mount miniature toggle switches with a low contact resistance and are available with either Gold (Q) or Silver (R) contact material. The RS series miniature toggle switches have a minimum insulation resistance of 1000MΩ ...