Yoke type track roller 12mm id 32mm od 1

  • RS-stocknr. 191-3889
  • Fabrikantnummer NATV12-X-PP-A
  • Fabrikant INA
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Are ready-to-fit needle or cylindrical roller bearings of single or double row designAre mounted on shafts or studs (yoke type track rollers) or supplied with a heavy-section roller stud with fixing thread and a mounting aid (stud type track rollers)Have particularly thick-walled outer rings with a crowned outside surfaceCan support high radial loadsTolerate axial loads which are due to small misalignment defects, skewed running or temporary contact running impactsAre available with or without an inner ring (yoke type track rollers)Are produced with or without axial guidance of the outer ring (stud type track rollers are always produced with axial guidance)Are open or sealed on both sidesAre not mounted in a housing bore, but are supported on a flat mating trackCan be adjusted to the mating track in the design with the eccentric collar, thus permitting, for example, larger manufacturing tolerances in the adjacent construction

Specificaties
Kenmerk Waarde
Type Yoke
Roller Diameter 32mm
Roller Length 15mm
Static Load Rating 15700N
Dynamic Load Rating 9700N
Bore Size 12mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
47,57
(excl. BTW)
57,56
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 47,57
5 - 9
€ 45,67
10 - 24
€ 44,71
25 +
€ 43,76