EPCOS N87 Ferrite Core, 4500nH, 80 x 20.2 x 38.5mm, For Use With Power Transformers

  • RS-stocknr. 125-3683
  • Fabrikantnummer B66375G0000X187
  • Fabrikant EPCOS
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

EPCOS B66375 E80/38/20 Ferrite Cores

EPCOS E80/38/20 ferrite cores are for power applications in the frequency range up to 100kHZ. The material used in the cores N87 features a high saturation flux density and low-power loss. To IEC 61246.

EPCOS Ferrite Cores

Specificaties
Kenmerk Waarde
Accessory Type Ferrite Core
For Use With Power Transformers
Dimensions 80 x 20.2 x 38.5mm
AL Rating 4500nH
Material N87
Depth 38.5mm
Length 80mm
Width 20.2mm
39 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
6,74
(excl. BTW)
8,16
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 6,74
10 - 49
€ 6,08
50 - 99
€ 4,46
100 - 249
€ 3,92
250 +
€ 3,64
Related Products
Range of high efficiency low heat loss 3 ...
Description:
Range of high efficiency low heat loss 3 phase auto transformers. Common input and output windingsEasy installation-mounting holes providedScrew terminal connectionsReverse operation posibleTransformers tested to EN 61558-2-13BLOCKIMPEX vacuum impregnation.
Designed specifically for DC-DC convertors and offline PWM ...
Description:
Designed specifically for DC-DC convertors and offline PWM switching regulatorsThe transformer is much smaller than a normal mains transformer for the same power rating due to the high operating frequency.
EPCOS B65819 RM7 Ferrite cores are increasingly required ...
Description:
EPCOS B65819 RM7 Ferrite cores are increasingly required for power applications. These ferrite cores are designed for two major applications low loss, highly stable filter inductors and other resonance determining inductors. The other application is low distortion broadband transmission. IEC62317-4. ...
EPCOS B65981 PQ50/50 Ferrite cores have optimised round ...
Description:
EPCOS B65981 PQ50/50 Ferrite cores have optimised round leg and wider outer surface to conventional cores. The round leg on these ferrite cores reduces winding length and the wider surface area lowers the thermal resistance by offering a larger area ...