EPCOS N87 E 70 Ferrite Core Transformer, 9700nH, 70.5 x 32 x 33.2mm, For Use With transformer

  • RS-stocknr. 647-9389
  • Fabrikantnummer B66371G0000X187
  • Fabrikant EPCOS
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

E 65/32/27 & E 70/33/32 Cores

Ferrite core supplied without air-gap

//media.rs-online.com/t_line/LD213365-04.gif

EPCOS Ferrite Cores

Specificaties
Kenmerk Waarde
Accessory Type E 70
For Use With Transformer
Dimensions 70.5 x 32 x 33.2mm
AL Rating 9700nH
Material N87
Depth 33.2mm
Length 70.5mm
Width 32mm
24 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
28 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 2)
8,825
(excl. BTW)
10,678
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 18
€ 8,825
€ 17,65
20 - 48
€ 7,525
€ 15,05
50 - 98
€ 5,215
€ 10,43
100 - 198
€ 5,01
€ 10,02
200 +
€ 4,82
€ 9,64
*prijsindicatie
Verpakkingsopties
Related Products
SMD B78304 series DC to DC converters with ...
Description:
SMD B78304 series DC to DC converters with an E 6.3 ferrite core, cover cap and 6 gullwing terminals. These DC to DC transformers have a low stray inductance, low winding capacitance and low DC resistance. Typical applications for these ...
EPCOS B65819 RM7 Ferrite cores are increasingly required ...
Description:
EPCOS B65819 RM7 Ferrite cores are increasingly required for power applications. These ferrite cores are designed for two major applications low loss, highly stable filter inductors and other resonance determining inductors. The other application is low distortion broadband transmission. IEC62317-4. ...
EPCOS E80/38/20 ferrite cores are for power applications ...
Description:
EPCOS E80/38/20 ferrite cores are for power applications in the frequency range up to 100kHZ. The material used in the cores N87 features a high saturation flux density and low-power loss. To IEC 61246.
B66423 EFD 30/15/9 transformer ferrite cores from EPCOS ...
Description:
B66423 EFD 30/15/9 transformer ferrite cores from EPCOS are ideal for DC-DC converters. These are E cores with a lower centre leg that has been flattened, and are suitable for flat transformer designs. Ungapped and gapped versions are available, and ...