Block N87 E 25 Ferrite Core Transformer, 1850nH, 25 x 7.5 x 12.8mm, For Use With Transformers, Reactors

  • RS-stocknr. 840-7695
  • Fabrikantnummer FS-1E-2507-10
  • Fabrikant Block
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Block FS-1E Series Size 25/13/11 Ferrite Transformer Cores

FS-1E series size 25/13/11 ferrite transformer cores made from N87. These standard 'E' type ferrite transformer cores are available with air gaps inserted:
Stock number 840-7443 has a 0.1mm gap
Stock number 840-7525 has a 0.2mm gap
Stock number 840-7608 has a 0.5mm gap
Stock number 840-7695 has a 1.0mm gap
Typical applications for these ferrite cores include transformers and inductors in switch mode power supplies
For bobbin see stock number 840-7250

Transformer Ferrite Kits - Cores

The AL value in the table applies to a core set consisting of two cores without air gap Cores ETD conform to IEC 51(CO)276

Specificaties
Kenmerk Waarde
Accessory Type E 25
For Use With Reactors, Transformers
Dimensions 25 x 7.5 x 12.8mm
AL Rating 1850nH
Material N87
Depth 12.8mm
Length 25mm
Width 7.5mm
Maximum Temperature +210°C
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
EPCOS ELP ferrite cores enable the design of ...
Description:
EPCOS ELP ferrite cores enable the design of flat transformers and feature excellent thermal performance due to the large core surface. Planar E shape transformer cores offer an attractive alternative to conventional core shapes, ideal for when low profile magnetic ...
EPCOS B66319 E30/15/7 ferrite cores have a rectangular ...
Description:
EPCOS B66319 E30/15/7 ferrite cores have a rectangular centre leg with compact mounting dimensions and wide openings on each side. Suitable for power applications in the frequency range up to 100 KHz. The materials used in the cores N30, N87 ...
Compatible with MIL 24308 connectorsHigh reliability and military ...
Description:
Compatible with MIL 24308 connectorsHigh reliability and military performanceLow contact resistanceMonobloc moisture resistantHigh temperature withstand insulatorCable/panel mount versions illustratedOriginal D also available in straight and 90° PCB versionsFor suitable hole cutters see stock no. 477-8690.
EPCOS B65733 PM114/93 Ferrite cores are suitable for ...
Description:
EPCOS B65733 PM114/93 Ferrite cores are suitable for use in transformers handling high powers in the frequency range up to 300 kHz. These PM Cores can be used in numerous tasks in telecommunications and industrial electronics. The pot core shape ...