Parker Single Tube Clamp RAP3-319

  • RS-stocknr. 727-705
  • Fabrikantnummer RAP3-319
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Tube Clamp Single

Series A Tubeclamps by Parker designed to enable fixing of straight and bent, tubes and hoses. The clamp body is in two equal halves with a ribbed bore enabling secure fixing while ensuring a high degree of sound deadening and vibration damping. Ideal for light construction, they are available in seven standard sizes for nominal mechanical requirements.

Features and Benefits

• Reset capability
• High-tensile strength
• High abrasion resistance
• Resistant to cold
• DIN 3015
• Operating temperature range -30°C to 90°C
• Polypropylene clamp body with steel weld plate, zinc plated steel top plate and M6 x 30 mm zinc plated steel clamp screws

Specificaties
Kenmerk Waarde
Number of Tubes Held Single
For Tube Outside Diameter 3/4in
Clamp Spacing 48in
Body Material PP
Maximum Operating Temperature +90°C
Maximum Tube Outer Diameter 3/4in
Minimum Operating Temperature -30°C
65 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
2,534
(excl. BTW)
3,066
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 2,534
€ 12,67
25 - 45
€ 2,46
€ 12,30
50 +
€ 2,378
€ 11,89
*prijsindicatie
Related Products
The RK LightClamps plastic connection system guarantees flexibility ...
Description:
The RK LightClamps plastic connection system guarantees flexibility thanks to the design of its reducing bushes (sold separately). This design enables the clamping of the most various tube sections. The change to other diameters or sections requires only the change ...
MSM-P Flanged bolts are used to match with ...
Description:
MSM-P Flanged bolts are used to match with a connecting clamp. Available in a range of sizes to fit into different structural systems. Zinc Plated Steel.
The RK LightClamps plastic connection system guarantees flexibility ...
Description:
The RK LightClamps plastic connection system guarantees flexibility thanks to the design of its reducing bushes (sold separately). This design enables the clamping of the most various tube sections. The change to other diameters or sections requires only the change ...
Manual flaring tools are used to produce the ...
Description:
Manual flaring tools are used to produce the required 37° flare at the hydraulic tube end to ensure an effective single seal point between the nose of the Triple-Lok flared tube fitting and the tube. These tools are used in ...