ifm Electronic Ultrasonic Sensor Barrel M18 x 1, Maximum of 300 mm, PNP NO/NC, 4-Pin M12 Connector IP67

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

UGT200 Series Diffuse Ultrasonic Sensors

IFM Electronics UGT200 series diffuse ultrasonic sensors offer an alternative sensing type for long ranges and difficult surfaces. The UGT200 series are able to operate reliably with heavy soiling, allowing them to be used where photoelectric sensors meet their limits.

Ultrasonic sensors transmit and receive sound waves in the ultrasonic range. Objects to be detected reflect the sound waves and distance information is determined via a time of flight measurement. Ultrasonic sensors are able to detect various object types, including colour or transparent objects or objects with a surface shine.

Features and Benefits

M18 Plastic housing
Digital and analogue output
Vibrating sound transducer reduces the deposit of dirt
Wide sensing range
Easy setting via wire or button teach

IFM Electric Ultrasonic Sensors

Specificaties
Kenmerk Waarde
Detection Range 40 → 300 mm
Output Type PNP NO/NC
Body Style Barrel
Thread Size M18 x 1
Transducer Frequency 300kHz
Maximum DC Voltage 30V
Supply Voltage 10 → 30 V dc
Terminal Type M12 - 4 Pin
IP Rating IP67
Housing Material Epoxy Glass Ceramic, PBT, Polyamide
Reverse Polarity Protection Yes
Short Circuit Overload Protection Yes
Sensor Configuration Diffuse Reflection
Switching Frequency 8 Hz
Maximum Operating Temperature +70°C
Length 60.5mm
Response Time 0.1 s
Minimum Operating Temperature -20°C
Switching Current <35 mA
Standards Met CE, CULus, CULus Recognised, EN 55011, EN 60068-2-27, EN 60068-2-6, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-6, UL
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
9 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
134,50
(excl. BTW)
162,74
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 134,50
Related Products
Capacitive sensors are used for the non-contact detection ...
Description:
Capacitive sensors are used for the non-contact detection of any objects. In contrast to inductive sensors, which only detect metallic objects, capacitive sensors can also detect non-metallic materials. Typical applications are in the wood, paper, glass, plastic, food and chemical ...
Photoelectric sensors are used where safe and non-contact ...
Description:
Photoelectric sensors are used where safe and non-contact de-tection of the exact position of objects is required. The material of the objects to be detected is of no importance. Compared to proximity switches photoelectric sensors have a much higher sensing ...
The Turck Banner T30U series of ultra-sonic sensors ...
Description:
The Turck Banner T30U series of ultra-sonic sensors are housed in a T-style right angled housing with a 30 mm threaded nose. The T30U series offer a choice of dual-discrete or analogue/discrete outputs and is available with ranges of 150 ...
Ultrasonic proximity switch to 6000mmCylindrical designSwitching output2 switching ...
Description:
Ultrasonic proximity switch to 6000mmCylindrical designSwitching output2 switching limits configurable via potentiometerBackground fadeLED status displaysConnector version.