Grey Plastic Vent Grille, 63 x 63mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: HU
Productomschrijving

Schneider Electric Airing Grille - NSYCAG38LP

Brought to you in a set of two, these pressure compensating plugs help to protect cabinets from condensation caused by temperature changes. Some may refer to these airing grilles as air vent covers, this is because of the nature of their role - they are used as a cover to mount over openings that have been produced in walls to create an airflow and ventilation.

Features & Benefits

• Forms part of the ClimaSsys range of products
• Compatible for use with Thalassa TBS, Thalassa PLM and Thalassa PLS
• The type of components is a plastic ventilation louvre, most would use the component as a thermal management accessory
• The fixing mode is by screws
• Comprised of a strong and hardwearing polyamide material
• Cut-out dimensions are 38 mm
• Dimensions - H63 mm x w63 mm x D15mm (this is the thread size)
• Holds an ingress protection of IP45, this means that the airing grilles are protected against solid objects larger than 1mm (wires, nails, screws, larger insects and other potentially invasive small objects such as tools/small. This IP rating also means that the pressure compensating plugs are protected against low-pressure jets (6.3 mm) of directed water from any angle (limited ingress permitted with no harmful effects
• Untreated with a built-in, integrated filter

Specificaties
Kenmerk Waarde
Dimensions 63 x 63mm
Flange Width 38mm
Material Plastic
Colour Grey
Height 63mm
Width 63mm
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
124 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
14,14
(excl. BTW)
17,11
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 14,14
10 - 14
€ 13,75
15 +
€ 13,38
Related Products
For air extraction where up to 90% free ...
Description:
For air extraction where up to 90% free area is required.Aluminium eggcrate core 12mm x 12mm with a 32mm flange, pre-drilled for screw fixingExtruded aluminium frames fully welded and linished to conceal the mitred cornersStove enamelled silver or white finish. ...
For air extraction where up to 90% free ...
Description:
For air extraction where up to 90% free area is required.Aluminium eggcrate core 12mm x 12mm with a 32mm flange, pre-drilled for screw fixingExtruded aluminium frames fully welded and linished to conceal the mitred cornersStove enamelled silver or white finish. ...
Slim profile allows 2 to be installed back-to-back ...
Description:
Slim profile allows 2 to be installed back-to-back within a standard door.Enables air transfer where through vision is not requiredMade from extruded aluminium with fully welded and linished mitred corners Pre-drilled fixing holes.
4-way, square louvre face diffusers suitable for ceiling ...
Description:
4-way, square louvre face diffusers suitable for ceiling mounting, allowing air to be introduced with the maximum diffusion and minimum disturbance. 3 sizes available to suit ducts 300mm, 450mm and 600mmThe core is removable, for easy cleaning and adjustable for ...